Instructions – 4A83L
Feet can be installed outward as shown below or reverse depending on the roof mounting.
Using 3/8" x 3/4" hex head bolts, 3/8" lock washers and 3/8" flat washers, bolt foot to cross member.
Snug tighten, but allow movement.
FEET OUTWARD
FEET INWARD
Refer to the Clamp and Lock Adjustment instructions to adjust the rack
to your ladder.
GO BACK AND ENSURE ALL HARDWARE IS TIGHT.
Your installation is now complete.
BE SURE LADDER IS SECURE PRIOR TO TRANSPORTATION.
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 11