Page 1
Th anks for purchasing one of our products. Pl ease read carefully the assembly instructions before the installation. Do not discard this manual or any of the packaging material until the unit has been completely assembled. B06 190924...
Page 5
RTA-325 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. • Do a quick inventory to make sure the product contains all the parts and hardware. • Missing, damaged and defective parts can be replaced at no cost to you. Please refer to the CONTACT card included with the product.
Page 6
RTA-325 Screw the Bolts (B) to the corresponding holes on the inside face of the Cabinet Top Panel (11), then assemble it to the panels (7 & 8) by turning all the corresponding cam locks as shown. PLEASE REFER TO PAGE 4...
Page 7
RTA-325 PLEASE REFER TO PAGE 4 (Parts from step 5 shown here upside-down)
Page 11
RTA-325 P.11 P.11 PLEASE REFER TO PAGE 4...
Page 12
RTA-325 P.12 P.12 4X35 MM Left INCORRECT! Will raise 1" more and drawer won't fit Right FRONT CORRECT PLEASE REFER TO PAGE 4...
Page 13
RTA-325 P.13 P.13 4X35 MM INCORRECT! Will raise 1" more and drawer won't fit CORRECT...
Page 14
RTA-325 P.14 P.14 DONE! Before you start using the unit, make sure that all the screws, bolts, cam locks, etc. are properly tightened, and read all the warnings in the next page. ENJOY YOUR NEW UNIT!
RTA-325 P.15 P.15 AFTER THE ASSEMBLY IS DONE, PLEASE READ CAREFULLY THE FOLLOWING CARE AND MAINTENANCE WARNINGS: WEIGHT LIMITS • Do not exceed the indicated weight limits. • Do not expose the surfaces to direct sunlight or to extreme environmental conditions.
Need help?
Do you have a question about the Techni Mobili RTA-325 and is the answer not in the manual?
Questions and answers