Page 8
#1 Insert the cable coming from the motor on leg (1) into the Power Box (11) in its respective input terminal. #2 Insert the cable coming from the Control panel (10) into the Power Box (11) in its respective input terminal. #3 Insert the Power Cable (12) into the respective terminal of Power Box (11).
Page 9
Height unit switch: “CM”: Press bottons “1”, “2” and “M” together for about 5 seconds until the display flashes. Then press botton “1” for about 5 seconds until display “C”. “Inch”: Press bottons “1”, “2” and “M” together for about 5 seconds until the display flashes.
Page 10
- DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT OR EXTREME ENVIRONMENTAL CONDITIONS. ANY DAMAGE RESULTING FROM SUCH EXPOSURE IS NOT COVERED BY THE PRODUCT’S WARRANTY. - THE PREFERABLE METHOD TO CLEAN THE SURFACES IS TO WIPE THEM USING A SOFT CLOTH DAMPENED WITH A SOLUTION SOAP AND WATER, THEN DRY WITH A CLEAN TOWEL.
Need help?
Do you have a question about the Techni Mobili RTA-3839SU and is the answer not in the manual?
Questions and answers