Options Screen Error Messages - Canon 08011-41-UD2-003 Installation And Configuration Manual

6.1.10 Options Screen Error Messages

This section explains the Options screen error messages, along with possible causes
and remedies. For more information on the remedies, see
Settings," on p. 113.
Message
Configuration Session
Timeout cannot be zero.
Configuration Session
Timeout cannot exceed 60
minutes.
Configuration Session
Timeout has to be a
number.
Configuration Session
Timeout needs to be set.
Configuration Session
Timeout needs to be a
positive number.
Network Socket Timeout
cannot be zero.
Network Socket Timeout
needs to be a positive
number.
Network Socket Timeout
cannot exceed 30 seconds.
Network Socket Timeout
has to be a number.
Network Socket Timeout
needs to be set.
The application display
name is too long.
Maximum length is 20
characters.
160 Authorized Send Installation and Configuration Guide for imageRUNNER Machines
Cause
Zero is entered in the
[Configuration Session
Timeout (min)] text box.
A number greater than 60 is
entered in the [Configuration
Session Timeout (min)] text
box.
A non-numeric value is
entered in the [Configuration
Session Timeout (min)] text
box.
The [Configuration Session
Timeout (min)] text box is
blank.
A negative value is entered in
the [Configuration Session
Timeout (min)] text box.
Zero is entered in the
[Network Socket Timeout
(seconds)] text box.
A negative value is entered in
the [Network Socket Timeout
(seconds)] text box.
The number entered in the
[Network Socket Timeout
(seconds)] text box is greater
than 30.
A non-numeric value is
entered in the [Network Socket
Timeout (seconds)] text box.
The [Network Socket Timeout
(seconds)] text box is blank.
The application display name
entered in the [Application
Display Name (up to 20
characters)] text box exceeds
20 characters.
"Configuring Optional
Remedy
Enter a numeric value greater than
zero for the configuration session
timeout.
Enter a number less than or equal
to 60 for the configuration session
timeout.
Enter a numeric value for the
configuration session timeout.
Enter a numeric value for the
configuration session timeout.
Enter a positive numeric value
between 1 and 60 for the
configuration session timeout.
Enter a numeric value greater than
zero for the network socket
timeout.
Enter a numeric value greater than
zero for the network socket
timeout.
Enter a number less than or equal
to 30 for the network socket
timeout.
Enter a numeric value for the
network socket timeout.
Enter a numeric value for the
network socket timeout.
Make sure the application display
name does not exceed 20
characters.