Configuring Scan To Fax Settings - Canon 08011-41-UD2-003 Installation And Configuration Manual

3.10 Configuring Scan to Fax Settings

You can enable the Scan to Fax function and configure the General Settings.
1. Click [Scan to Fax].
If necessary, see the screen shot in step 12 of
on p. 35.
2. Click the [Enable Scan to Fax] check box.
If you want to disable the Scan to Fax function, click the [Enable Scan to Fax]
check box to clear the check mark.
NOTE
• The Scan to Fax function is disabled by default.
• You can only disable the Scan to Fax function if there is at least one other
Authorized Send function enabled.
Authorized Send Installation and Configuration Guide for imageRUNNER Machines
"Flow of Configuration Operations,"
97