Address Book Servers Screen Error Message; Create/Update Address Book Server Screen Error Messages - Canon 08011-41-UD2-003 Installation And Configuration Manual

6.1.4

Address Book Servers Screen Error Message

This section explains the Address Book Servers screen error message, along with a
possible cause and remedy. For more information on the remedy, see
Address Book Server,"
Message
Maximum address book
servers have been created.
To create a new address
book server, you have to
delete the old one(s) first.
6.1.5 Create/Update Address Book Server Screen Error
Messages
This section explains the Create Address Book Server and Update Address Book
Server screen error messages, along with possible causes and remedies. For more
information on the remedies, see
"Editing an Address Book Server,"
Message
Address Book Port has to
be a number.
Address Book Port cannot
be zero.
Address Book port has to
be a positive number.
Cannot pull a live domain
controller from DNS
servers.
Address Book Host is
missing.
Address Book Port is
missing.
Address Book Hostname is
missing.
Address Book Public DN is
missing.
Address Book Public User
Name is missing.
156 Authorized Send Installation and Configuration Guide for imageRUNNER Machines
on p. 67.
Cause
The maximum number of 10
address book servers has been
created.
"Creating an Address Book Server,"
on p. 90.
Cause
A non-numeric value is entered
in the [Port] text box.
Zero is entered in the [Port] text
box.
A negative number is entered in
the [Port] text box.
The [Pull Host from DNS] radio
button is set to 'Yes' and a live
domain controller cannot be
found.
The [Host] text box is blank.
The [Port] text box is blank.
The [Hostname] text box is
blank.
The [Public DN] text box is
blank.
The [Public User Name] text
box is blank.
"Creating an
Remedy
Delete the old address book
server(s) first, and make sure you
do not exceed 10 servers in total.
on p. 67, and
Remedy
Enter a numeric value for the
port.
Enter a numeric value greater
than zero for the port.
Enter a numeric value greater
than zero for the port.
Check the configuration and try
again.
Enter the DNS name or IP
address of the address book
server.
Enter a valid number for the
port.
Enter the host name of the
address book server.
Enter the public DN.
Enter the public user name.