Canon 08011-41-UD2-003 Installation And Configuration Manual page 66

Use Public
Credentials:
SMTP Public
Username:
SMTP Public
Password:
3. Click [Save].
If you make a mistake while configuring the settings, click [Reset] to return the
settings to their original values.
A message is displayed informing you that the configuration has been saved.
IMPORTANT
• Click the [Test] check box if you want to test the validity of the IP address you
entered before saving.
• If validation fails, an error message will be displayed. Enter the correct
information ➞ click [Save].
NOTE
The [Test] check box is selected by default. If you do not want to test the validity
of the address you entered, click the check box to clear the check mark.
66 Authorized Send Installation and Configuration Guide for imageRUNNER Machines
Select [Yes] to configure the SMTP public credentials
(Public User Name, Public Password). If [Yes] is selected, enter
the user's SMTP public name and password for SMTP
authentication. If [No] is selected, the user's normal login
credentials are used.
If [Yes] is selected for Use Public Credentials, you must enter
the user name for SMTP authentication.
If [Yes] is selected for Use Public Credentials, you must enter
the password for SMTP authentication.