Configuring Scan Settings - Canon 08011-41-UD2-003 Installation And Configuration Manual

3.15 Configuring Scan Settings

You can configure the Default File Type Settings and Default Scan Settings For File
Types. This causes the default scan settings to automatically change based on the file
type that is selected.
1. Click [Scan Settings].
If necessary, see the screen shot in step 18 of
on p. 35.
2. Specify the Default File Type Settings.
Default File Type Settings
Default File Type Selected: If want to change the default file type, select a file
Disabled:
108 Authorized Send Installation and Configuration Guide for imageRUNNER Machines
"Flow of Configuration Operations,"
type from the drop-down list. The default Default File
Type Selected is 'PDF'.
Select this check box if you want to disable and gray
out the File Type drop-down list on the SCAN
SETTINGS screen.