3.11 Configuring Scan to Folder Settings
You can enable the Scan to Folder function and configure the Access Controls and
General Settings.
1. Click [Scan to Folder] ➞ [General].
If necessary, see the screen shot in step 14 of
on p. 35.
2. Select the [Enable Scan to Folder] check box.
If you want to disable the Scan to Folder function, click the [Enable Scan to Folder]
check box to clear the check mark.
NOTE
You can only disable the Scan to Folder function if there is at least one other
Authorized Send function enabled.
100
Authorized Send Installation and Configuration Guide for imageRUNNER Machines
"Flow of Configuration Operations,"