Table of Contents
Advertisement
Important Safety Information
Carefully read the precautions before using the board.
Environmental conditions:
•
Use this product in environments with temperatures between 0˚C and
60˚C or between -40˚C to 85˚C depending on the board model.
•
Do not leave this product in an environment where the storage
temperature may be below -40°C or above 85° C. To prevent from
damages, the product must be used in a controlled environment.
Care for your IBASE products:
•
Before cleaning the PCB, unplug all cables and remove the battery.
•
Clean the PCB with a circuit board cleaner or degreaser, or use cotton
swabs and alcohol.
•
Vacuum the dust with a computer vacuum cleaner to prevent the fan
from being clogged.
Anti-static precautions
•
Wear an anti-static wrist strap to avoid electrostatic discharge.
•
Place the PCB on an anti-static kit or mat.
•
Hold the edges of PCB when handling.
•
Touch the edges of non-metallic components of the product instead of
the surface of the PCB.
•
Ground yourself by touching a grounded conductor or a grounded bit of
metal frequently to discharge any static.
There is danger of explosion if the internal lithium-ion battery is replaced by
an incorrect type. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to
the manufacturer's instructions or recycle them at a local recycling facility or
battery collection point.
iv
WARNING
CAUTION
IB836 User's Manual
Advertisement
Table of Contents
