IBASE Technology IB836 Series User Manual
  1. Manuals
  2. Brands
  3. IBASE Technology Manuals
  4. Industrial PC
  5. IB836 Series
  6. User manual

IBASE Technology IB836 Series User Manual

Intel atom x6000 series / pentium® / celeron 3.5" disk-size sbc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IB836 Series
®
Intel
Atom™ x6000 series
®
®
/ Pentium
/ Celeron
3.5" Disk-Size SBC
User's Manual
Version 1.0
(September 2021)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IB836 Series and is the answer not in the manual?

Questions and answers

Related Manuals for IBASE Technology IB836 Series

Summary of Contents for IBASE Technology IB836 Series

  • Page 1 IB836 Series ® Intel Atom™ x6000 series ® ® / Pentium / Celeron 3.5" Disk-Size SBC User’s Manual Version 1.0 (September 2021)
  • Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”). Disclaimer IBASE reserves the right to make changes and improvements to the products described in this document without prior notice.
  • Page 3 Compliance This product has passed CE Class B tests for environmental specifications and limits. This product is in accordance with the directives of the European Union (EU). In a domestic environment, this product may cause radio interference in which case users may be required to take adequate measures.
  • Page 4 Important Safety Information Carefully read the precautions before using the board. Environmental conditions: • Use this product in environments with temperatures between 0˚C and 60˚C or between -40˚C to 85˚C depending on the board model. • Do not leave this product in an environment where the storage temperature may be below -40°C or above 85°...
  • Page 5 Warranty Policy • IBASE standard products: 24-month (2-year) warranty from the date of shipment. If the date of shipment cannot be ascertained, the product serial numbers can be used to determine the approximate shipping date. • -party parts: 12-month (1-year) warranty from delivery for the 3 -party parts that are not manufactured by IBASE, such as CPU, CPU cooler, memory, storage devices, power adapter, panel and touchscreen.

  • Page 6: Table Of Contents

    Table of Contents Chapter 1 General Information ........... 1 Introduction ..................2 Features ....................3 Packing List ..................4 Optional Accessories ................4 Specifications ..................5 Block Diagram ..................7 Product View ..................8 Dimensions ..................10 Chapter 2 Hardware Configuration ........11 Essential Installations ................
  • Page 7 Appendix ..................67 I/O Port Address Map ................68 Interrupt Request Lines (IRQ) ............70 Watchdog Timer Configuration ............71 Onboard Connector Reference Types ..........75 IB836 User’s Manual...
  • Page 8 This page is intentionally left blank. IB836 User’s Manual viii...

  • Page 9: Chapter 1 General Information

    Chapter 1 General Information The information provided in this chapter includes: • Features • Packing List • Optional Accessories • Specifications • Block Diagram • Product View • Board Dimensions...

  • Page 10: Introduction

    Introduction The IB836 is a 3.5-inch single board computer powered by robust Intel® Atom® / Pentium or Celeron processors to meet the demands of critical real-time computing in applications spanning the retail, transport, industrial automation, and medical sectors. The SBC has two DDR4 memory slots with a 32GB capacity and in-band error-correcting code (IBECC) functionality that corrects single-bit memory errors in standard, non-ECC memory.

  • Page 11: Features

    General Information Features • 3.5” disk-size SBC with Intel ® ® ® ® Atom or Pentium / Celeron processor • 2 x DDR4-3200 SO-DIMM slots, expandable up to 32 GB • Video output through LVDS or EDP connector, Display Port, and USB Type C •...

  • Page 12: Packing List

    Packing List Your IB836 package should include the items listed below. If any of the items below is missing, contact the distributor or dealer from whom you purchased the product. • IB836 SBC • Disk (including chipset drivers and flash memory utility) •...

  • Page 13: Specifications

    General Information Specifications IB836F(E)-6425E IB836F(E)-6413E IB836F(E)-6211E IB836F(E)-J6413E IB836F(E)-N6210 Model Remarks: IB836F: for LVDS only; IB836FE: for eDP only 3.5” disk-size SBC Form Factor Atom® 4C/ Atom® 4C/ Atom® 2C/ Celeron® Celeron® CPU Type x6425E x6413E x6211E 4C/ J6413 4C/ N6210 1.8GHz 1.5GHz 1.2GHz...
  • Page 14 IB836F(E)-6425E IB836F(E)-6413E IB836F(E)-6211E IB836F(E)-J6413E IB836F(E)-N6210 Model I/O Ports 2x DisplayPort (DP connector & Type-C), eDP or 24-bit Display dual-channel LVDS 2 x RJ45 GbE LAN • 2x USB2.0 (Pin-header) • 3x USB3.1 (Type-A), 1x USB Type-C • 1x RS232/422/485 (Jumperless selection) Serial •...

  • Page 15: Block Diagram

    General Information Block Diagram IB836 User’s Manual...

  • Page 16: Product View

    Product View Top View Bottom View Photos of IB836 ＊The photos above are for reference only. Some minor components may differ. IB836 User’s Manual...
  • Page 17 General Information I/O View Edge connectors (from left to right) COM1 RS-232/422/485 Port Type-C Connector CN6, CN7 USB3.0 Connector LAN Connector LAN Connector CN10 DP Connector Oblique View IB836 User’s Manual...

  • Page 18: Dimensions

    Dimensions IB836 User’s Manual...

  • Page 19: Chapter 2 Hardware Configuration

    Chapter 2 Hardware Configuration This section provides information on jumper settings and connectors on the IB836 in order to set up a workable system. On top of that, you will also need to install crucial pieces such as the CPU and the memory before using the product. The topics covered are: •...

  • Page 20: Essential Installations

    Follow the instructions below to install the memory. 2.1.1 Installing the Memory The IB836 series supports two DDR4 memory sockets for a maximum total memory of 32 GB. To install the modules, locate the memory slot on the board and perform the following steps: Align the key of the memory module with that on the memory slot and insert the module slantwise.

  • Page 21: Setting The Jumpers

    Hardware Configuration Setting the Jumpers Set up and configure your IB836 by using jumpers for various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your use. 2.2.1 How to Set Jumpers Jumpers are short-length conductors consisting of several metal pins with a non-conductive base mounted on the circuit board.

  • Page 22: Jumper & Connector Locations

    Jumper & Connector Locations IB836 User’s Manual...

  • Page 23: Jumpers Quick Reference

    Hardware Configuration Jumpers Quick Reference Jumper / Switch Function Clear CMOS Data Clear ME Register EDP Panel Power Select LVDS Panel Power Select LVDS Panel Brightness Select ATX / AT Power Select 2.4.1 Clear CMOS Data (SW1) Function Setting Normal P1-OFF (default) Clear CMOS...
  • Page 24 2.4.2 Clear ME Register (SW1) Function Setting Normal P2-OFF (default) Clear ME P2-ON 2.4.3 EDP Panel Power Selections (JP2) Function Pin closed Illustration 3.3V (default) IB836 User’s Manual...
  • Page 25 Hardware Configuration 2.4.4 LVDS Panel Power Selection (JP1) Function Pin closed Illustration 3.3V (default) 2.4.5 LVDS Panel Brightness Selection (JP3) Function Pin closed Illustration 3.3V (default) IB836 User’s Manual...
  • Page 26 2.4.6 ATX / AT Power Selection (JP4) Function Pin closed Illustration (default) IB836 User’s Manual...

  • Page 27: Connectors Quick Reference

    Hardware Configuration Connectors Quick Reference Connector Function SIM Card Slot Amplifier Connector DC Power Input Connector J5, J8 DDR4 Slots SATA HDD Power Connector Fan Power Connector Audio Connector Mini PCIE Connector J10, J13 LVDS Connector USB 2.0 Connector Battery Connector LCD Backlight Connector SMBUS Connector J24, J21, J17...
  • Page 28 2.5.1 COM1 RS-232/422/485 Port (CN4) COM1 port is jumper-less and configurable in BIOS. Assignment Assignment DSR, Data set ready DCD, Data carrier detect Ground DTR, Data terminal ready Ground CTS, Clear to send TX, Transmit RTS, Request to send RX, Receive RI, Ring Indicator Assignment RS-232...
  • Page 29 Hardware Configuration 2.5.2 Amplifier Connector (J3) Assignment Assignment SPK_L+ SPK_R- SPK_L- SPK_R+ 2.5.3 Audio Connector (J7) Assignment Assignment Lineout_L Lineout_R JD_FRONT Ground LINEIN_L Linein_R JD_LINEIN Ground MIC_L MIC-R JD_MIC1 Ground IB836 User’s Manual...
  • Page 30 2.5.4 SATA HDD Power Connector (J16) Assignment Assignment Ground Ground +12V 2.5.5 Front Panel Connector (J26) Assignment Assignment Ground PWR_BTN 3.3V HDD Active Ground Reset Ground IB836 User’s Manual...
  • Page 31 Hardware Configuration J26 is utilized for system indicators to provide light indication of the computer activities and switches to change the computer status. It provides interfaces for the following functions. • ATX Power ON Switch (Pins 1 and 2) The 2 pins makes an “ATX Power Supply On/Off Switch” for the system that connects to the power switch on the case.
  • Page 32 2.5.7 Battery Connector (J19) Assignment Battery+ Ground 2.5.8 COM2, COM3, COM4 RS-232 Ports (J24, J21, J17) Assignment Assignment DCD, Data carrier detect RXD, Receive data TXD, Transmit data DTR, Data terminal ready Ground DSR, Data set ready RTS, Request to send CTS, Clear to send RI, Ring indicator Not Used...
  • Page 33 Hardware Configuration 2.5.9 DC Power Input Connector (J4) Assignment +9V ~ +36V Ground IB836 User’s Manual...
  • Page 34 2.5.10 Digital I/O Connector (J25) Assignment Assignment Ground OUT3 OUT1 OUT2 OUT0 2.5.11 LCD Backlight Connector (J22) Assignment Assignment +12V Brightness Control Backlight Enable Ground IB836 User’s Manual...
  • Page 35 Hardware Configuration 2.5.12 LVDS Connector (J10, J13) Assignment Assignment TX0P TX0N Ground Ground TX1P TX1N Ground Ground TX2P TX2N Ground Ground CLKP CLKN Ground Ground TX3P TX3N Power Power IB836 User’s Manual...
  • Page 36 2.5.13 SMBUS Connector (J23) Assignment Assignment +3.3V SMB_DATA SMB_CLK- Ground 2.5.14 Fan Power Connector (J6) IB836 User’s Manual...
  • Page 37 Hardware Configuration 2.5.15 EDP Connector (CN3) 2.5.16 SIM Card Slot (J2) IB836 User’s Manual...
  • Page 38 2.5.17 SATA Connectors (CN1,CN2) 2.5.18 23. Mini PCIE Connector (J9) IB836 User’s Manual...
  • Page 39 Hardware Configuration 2.5.19 DDR4 Slot (J5) 2.5.20 DDR4 Slot (J8) IB836 User’s Manual...
  • Page 40 2.5.21 DP Connector (CN10) 2.5.22 LAN Connector (CN9) IB836 User’s Manual...
  • Page 41 Hardware Configuration 2.5.23 LAN Connector (CN8) 2.5.24 USB3.0 Connector (CN7) IB836 User’s Manual...
  • Page 42 2.5.25 USB3.0 Connector (CN6) 2.5.26 Type-C Connector (CN5) IB836 User’s Manual...

  • Page 43: Chapter 3 Drivers Installation

    Chapter 3 Drivers Installation This chapter introduces installation of the following drivers: • ® Intel Chipset Software Installation Utility • VGA Driver • HD Audio Driver • LAN Driver • ® Intel Management Engine Drivers Installation...

  • Page 44: Intel ® Chipset Software Installation Utility

    ® Intel Chipset Software Installation Utility ® Note: After installing the Windows operating system, install the Intel Chipset Software Installation Utility first before proceeding with the drivers installation. ® The Intel Chipset drivers should be installed first before the software drivers to install INF files for Plug &...
  • Page 45 Driver Installation Click Intel(R) Chipset Software Installation Utility. ® When the Welcome screen to the Intel Chipset Device Software appears, click Next to continue. Accept the software license agreement and proceed with the installation process. On the Readme File Information screen, click Install for installation. After the installation, press Finish to complete the setup process.

  • Page 46: Vga Driver Installation

    VGA Driver Installation Insert the disk enclosed in the package with the board. Click Intel on the left pane and then Intel(R) Elkhartlake Chipset Drivers on the right pane. Click Intel(R) Elkhartlake Graphics Driver. When the Welcome screen appears, click Next to continue. IB836 User’s Manual...
  • Page 47 Driver Installation Click Yes to accept the license agreement and click Next in The Readme File Information screen. Click Next in the Setup Progress screen. Restart the computer when prompted. Click Finish, then remove any installation media from the drives. IB836 User’s Manual...

  • Page 48: Hd Audio Driver Installation

    HD Audio Driver Installation Insert the disk enclosed in the package with the board. Click Intel on the left pane and then Intel(R) Elkhartlake Chipset Drivers on the right pane. Click Realtek High Definition Audio Driver. On the Welcome screen, click Next to continue. When the InstallShield Wizard has successfully installed the Realtek Audio Driver, restart the computer.

  • Page 49: Intel® Me Drivers Installation

    Driver Installation Intel® ME Drivers Installation Insert the disk enclosed in the package with the board. Click Intel on the left pane and then Intel(R) ME Drivers. The welcome screen to the Intel® Management Engine Components appears. Click Next to continue. IB836 User’s Manual...
  • Page 50 Accept the license agreement and click Next. On the Setup’s Destination Folder screen, click Next to continue. After the Intel® components have been completely installed, click Finish. IB836 User’s Manual...

  • Page 51: Lan Driver Installation

    Driver Installation LAN Driver Installation Insert the disk enclosed in the package with the board. Click LAN Card on the left pane and then Intel LAN Controller Drivers on the right pane. Choose Intel(R) I21x Gigabit Network Drivers. In the welcome screen to the install wizard for Intel(R) Network Connections, click Next.
  • Page 52 In the Setup Options screen, click Next. Click install to begin the installation. Click Finish when Install wizard has completed. IB836 User’s Manual...

  • Page 53: Chapter 4 Bios Setup

    Chapter 4 BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: • Main Settings • Advanced Settings • Chipset Settings • Security Settings •...

  • Page 54: Introduction

    4.1 Introduction The BIOS (Basic Input/Output System) installed in the ROM of your ® computer system supports Intel processors. The BIOS provides critical low-level support for standard devices such as disk drives, serial ports and parallel ports. It also provides password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system.

  • Page 55: Main Settings

    BIOS Setup 4.3 Main Settings BIOS Setting Description System Date Sets the date. Use the <Tab> key to switch between the data elements. System Time Set the time. Use the <Tab> key to switch between the data elements. IB836 User’s Manual...

  • Page 56: Advanced Settings

    4.4 Advanced Settings This section allows you to configure, improve your system and allows you to set up some system features according to your preference. 4.4.1 CPU Configuration Displays CPU configuration parameters. IB836 User’s Manual...
  • Page 57 BIOS Setup 4.4.2 PCH-FW Configuration BIOS Setting Description ME State When disabled ME will be put into ME Temporarily Disabled Mode. 4.4.3 Trusted Computing IB836 User’s Manual...
  • Page 58 BIOS Setting Description Security Device Enables / Disables BIOS support for security Support device. OS will not show security device. TCG EFI protocol and INTIA interface will not be available. SHA-1 PCR Bank Enables / Disables SHA-1 PCR Bank. SHA256 PCR Bank Enables / Disables SHA256 PCR Bank.
  • Page 59 BIOS Setup 4.4.4 ACPI Settings BIOS Setting Description Enable Hibernation Enables / Disables the system ability to hibernate (OS/S4 Sleep State). This option may be not effective with some OS. ACPI Sleep State Selects an ACPI sleep state (Suspend Disabled or S3) where the system will enter when the Suspend button is pressed.
  • Page 60 4.4.5 LVDS (eDP/DP) Configuration BIOS Setting Description LVDS (eDP/DP) Enables / Disables LVDS (eDP/DP). Support Panel Color Depth Selects the panel collor depth. Options: 18 bit, 24 Bit (VESA), 24 bit (JEIDA) LVDS Channel Type Chooses the LVDS as single or dual channel. LCD Panel Type Selects LCD panel used by Intel Graphics Device by selecting the appropriate setup item.
  • Page 61 BIOS Setup 4.4.6 SMART Settings 4.4.7 F81846 Super IO Configuration BIOS Setting Description Standby Power on This setting enables or shutdown the standby S5(ERP) power for devices. Power Failure Options: Always on, Always off Serial Ports Sets parameters of serial ports. Configuration Enables / Disables the serial port and select an optimal setting for the Super IO device.
  • Page 62 Serial Port 1 Configuration BIOS Setting Description Serial Port Enables / Disables the serial port. Selects an optimal settings for Super I/O device. Change Settings Options: • Auto • IO = 3F8h; IRQ = 4 • IO = 3F8h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 •...
  • Page 63 BIOS Setup Serial Port 2 Configuration BIOS Setting Description Serial Port Enables / Disables the serial port. Selects an optimal settings for Super I/O device. Change Settings Options: • Auto • IO = 2F8h; IRQ = 3 • IO = 3F8h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 •...
  • Page 64 Serial Port 3 Configuration BIOS Setting Description Serial Port Enables / Disables the serial port. Selects an optimal settings for Super I/O device. Change Settings Options: • Auto • IO = 3E8h; IRQ = 7 • IO = 3E8h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 •...
  • Page 65 BIOS Setup Serial Port 4 Configuration BIOS Setting Description Serial Port Enables / Disables the serial port. Selects an optimal settings for Super I/O device. Change Settings Options: • Auto • IO = 2E8h; IRQ = 7 • IO = 3E8h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 •...
  • Page 66 4.4.8 Fintek Hardware Monitor BIOS Setting Description Temperatures / These fields are the parameters of the hardware Voltages monitoring function feature of the motherboard. The values are read-only values as monitored by the system and show the PC health status. IB836 User’s Manual...
  • Page 67 BIOS Setup 4.4.9 USB Configuration BIOS Setting Description • Legacy USB Support Enabled enables Legacy USB support. • Auto disables legacy support if there is no USB device connected. • Disabled keeps USB devices available only for EFI applications. XHCI Hand-off This is a workaround for OSes without XHCI hand-off support.
  • Page 68 4.4.10 Network Stack Configuration BIOS Setting Description Network Stack Enable/Disable UEFI Network Stack IPv4 PXE Support Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be available. IPv6 PXE Support Enable/Disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not be available.

  • Page 69: Chipset Settings

    BIOS Setup 4.5 Chipset Settings 4.5.1 System Agent (SA) Configuration BIOS Setting Description Primary display Select which of IGFX/PEG/PCI Graphics device should be Primary Display or select HG for Hybrid Gfx Internal Keep IGFX enabled based on the setup options Graphics GTT Size Options: 2MB, 4MB, 8MB...
  • Page 70 4.5.2 PCH-IO Configuration BIOS Setting Description SATA Controller(s) Enables / Disables the Serial ATA. SATA Mode Selection Selects IDE or AHCI Mode. Serial ATA Port 0~1 Enables / Disables Serial Port 0~1. SATA Ports Hot Plug Enables / Disables SATA Ports HotPlug. IB836 User’s Manual...

  • Page 71: Security Settings

    BIOS Setup 4.6 Security Settings BIOS Setting Description Setup Administrator Sets an administrator password for the setup Password utility. User Password Sets a user password. Secure Boot Secure Boot configuration IB836 User’s Manual...
  • Page 72 IB836 User’s Manual...

  • Page 73: Boot Settings

    BIOS Setup 4.7 Boot Settings BIOS Setting Description Setup Prompt Number of seconds to wait for setup activation Timeout key. 65535 (0xFFFF) means indefinite waiting. Bootup NumLock Selects the keyboard NumLock state. State Quiet Boot Enables / Disables Quiet Boot option. Fast Boot Enables / Disables boot with initialization of a minimal set of devices required to launch the...

  • Page 74: Save & Exit Settings

    4.8 Save & Exit Settings BIOS Setting Description Save Changes Exits system setup after saving the changes. and Exit Discard Changes Exits system setup without saving any changes. and Exit Save Changes Resets the system after saving the changes. and Reset Discard Changes Resets system setup without saving any changes.

  • Page 75: Appendix

    Appendix This section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration.

  • Page 76: I/O Port Address Map

    I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. The following table lists the I/O port addresses used. Address Device Description 0x0000F090-0x0000F097 Standard SATA AHCI Controller 0x0000F080-0x0000F083 Standard SATA AHCI Controller 0x0000F060-0x0000F07F...
  • Page 77 Appendix Address Device Description Microsoft ACPI-Compliant 0x00000066-0x00000066 Embedded Controller Mobile 6th/7th Generation Intel(R) Processor Family I/O PCI Express 0x0000E000-0x0000EFFF Root Port #1 - 9D10 0x0000F000-0x0000F03F Intel(R) Iris(R) Plus Graphics 650 0x00000020-0x00000021 Programmable interrupt controller 0x00000024-0x00000025 Programmable interrupt controller 0x00000028-0x00000029 Programmable interrupt controller 0x0000002C-0x0000002D Programmable interrupt controller 0x00000030-0x00000031...

  • Page 78: Interrupt Request Lines (Irq)

    Interrupt Request Lines (IRQ) Peripheral devices use interrupt request lines to notify CPU for the service required. The following table shows the IRQ used by the devices on board. Level Function IRQ 0 System timer IRQ 8 System CMOS/real time clock IRQ 14 Motherboard resources IRQ 55~204...

  • Page 79: Watchdog Timer Configuration

    Appendix Watchdog Timer Configuration The Watchdog Timer (WDT) is used to generate a variety of output signals after a user programmable count. The WDT is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock.
  • Page 80 bTime = strtol (argv[1], endptr, 10); printf("System will reset after %d seconds\n", bTime); if (bTime) EnableWDT(bTime); } else DisableWDT(); } return 0; //--------------------------------------------------------------------------- void EnableWDT(int interval) unsigned char bBuf; bBuf = Get_F81866_Reg(0x2B); bBuf &= (~0x20); Set_F81866_Reg(0x2B, bBuf); //Enable WDTO Set_F81866_LD(0x07); //switch to logic device 7 Set_F81866_Reg(0x30, 0x01);...
  • Page 81 Appendix // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE. //--------------------------------------------------------------------------- #include "F81866.H" #include <dos.h>...
  • Page 82 //--------------------------------------------------------------------------- void Set_F81866_Reg( unsigned char REG, unsigned char DATA) Unlock_F81866(); outportb(F81866_INDEX_PORT, REG); outportb(F81866_DATA_PORT, DATA); Lock_F81866(); //--------------------------------------------------------------------------- unsigned char Get_F81866_Reg(unsigned char REG) unsigned char Result; Unlock_F81866(); outportb(F81866_INDEX_PORT, REG); Result = inportb(F81866_DATA_PORT); Lock_F81866(); return Result; //--------------------------------------------------------------------------- //--------------------------------------------------------------------------- // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE.

  • Page 83: Onboard Connector Reference Types

    Appendix Onboard Connector Reference Types Compatible Mating Function Connector Onboard Type Type Hao Guo Xing Ye Hirose Audio Connector DF11-12S-PA66H DF11-12DS-2C SATA HDD E-call Power 0110-071-040 XHP-4 Connector Front Panel Dupon Dupon Setting 2.54 mm-pitch pin 2.54 mm-pitch (Female) Connector header (Male) USB 2.0 Hao Guo Xing Ye...

This manual is also suitable for:

Ib836f-6425eIb836f-6413eIb836f-6211eIb836f-j6413eIb836f-n6210Ib836fe-6425e ... Show all

Table of Contents