IBASE Technology UPC-7210 Series User Manual
  1. Manuals
  2. Brands
  3. IBASE Technology Manuals
  4. Industrial PC
  5. UPC-7210 Series
  6. User manual

IBASE Technology UPC-7210 Series User Manual

Industrial panel pc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
UPC-7210
Industrial Panel PC
User's Manual
Version 1.0
(Nov. 2018)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UPC-7210 Series and is the answer not in the manual?

Questions and answers

Related Manuals for IBASE Technology UPC-7210 Series

Summary of Contents for IBASE Technology UPC-7210 Series

  • Page 1 UPC-7210 Industrial Panel PC User’s Manual Version 1.0 (Nov. 2018)
  • Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”).

  • Page 3: Compliance

    EU directive of for waste electrical and electronic equipment (WEEE - 2012/19/EU). Instead, it should be disposed of by returning it to a municipal recycling collection point. Check local regulations for disposal of electronic products. UPC-7210 Series User Manual...

  • Page 4: Important Safety Information

    Use neutral cleaning agents or diluted alcohol to clean the device chassis with a cloth. Then wipe the chassis with a dry cloth. • Use a computer vacuum cleaner to remove dust to prevent the air vent or slots from getting clogged. UPC-7210 Series User Manual...

  • Page 5: Warning

    ＊ Products, however, that fail due to misuse, accident, improper installation or unauthorized repair shall be treated as out of warranty and customers shall be billed for repair and shipping charges. UPC-7210 Series User Manual...

  • Page 6: Technical Support & Services

    The arrangement of the peripherals • Software used (such as OS and application software, including the version numbers) 3. For repair service, please download the RMA form from http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the form and contact your distributor or sales representative. UPC-7210 Series User Manual...

  • Page 7: Table Of Contents

    Driver Installation ..............26 Chapter 4 BIOS Setup ................37 Appendix ...................... 63 I/O Port Address Map ................64 Interrupt Request Lines (IRQ) .............. 66 Watchdog Timer Configuration ............67 Onboard Connector Reference Types ..........70 UPC-7210 Series User Manual...

  • Page 8: Chapter 1 General Information

    Chapter 1 General Information The information provided in this chapter includes: • Features • Packing List • Specifications • Overview • Dimensions...

  • Page 9: Introduction

    Your product package should include the items listed below. If any of the items below is missing, contact the distributor or the dealer from whom you have purchased the product. • UPC-7210 system • Power adapter • Motherboard Driver DVD • Power core UPC-7210 Series User Manual...

  • Page 10: Specifications

    Power Connector Power Jack Power Button Rock Switch Mechanical Dimensions (mm) 529.5 x 321 x 59 Net Weight (kg) System Intel® i7 7600U UPC-7210 -I76 Intel® i5 7300U UPC-7210 -I73 Processor Intel® i3 7100U UPC-7210 -I71 UPC-7210 Series User Manual...
  • Page 11 0 ~ 50 °C (32 ~ 122 °F) Storage Temperature -20 ~ 70 °C (-4 ~ 158 °F) Storage Humidity 10 ~ 90% (non-condensing) Certification CE, FCC Class B, LVD All specifications are subject to change without prior notice. UPC-7210 Series User Manual...

  • Page 12: Overview

    General Information Overview Front View Oblique View I/O View Name Name Power Switch Display Port COM1 RS-232/422/485 Port Mic In USB 3.0 Port x 4 Line in Power input GbE LANｘ 2 HDMI UPC-7210 Series User Manual...
  • Page 13 Name Optional SMA anttena hole Optional SMA anttena hole Built-in speaker Built-in speaker SSD/HDD cover UPC-7210 Series User Manual...

  • Page 14: Dimensions

    General Information Dimensions Unit: mm UPC-7210 Series User Manual...

  • Page 15: Chapter 2 Hardware Configuration

    Chapter 2 Hardware Configuration The information provided in this chapter includes: • Memory installation and membrane keypad extension • Information and locations of connectors...

  • Page 16: Rear Cover Disassembly

    2. Insert the module slantwise and gently push the module straight down until the clips of the slot close to hold the module in place when the module touches the bottom of the slot. To remove the module, press the clips outwards with both hands. UPC-7210 Series User Manual...
  • Page 17 SSD/HDD Replacement 1. For changing SSD/HDD, unscrew the following 2 screws to open-up the SSD/HDD tray. 2. Once open-up the storage cover, you will see the SSD/HDD device, Please gentle release the SATA cable at first UPC-7210 Series User Manual...
  • Page 18 3. Then you are possible to take the SSD/HDD device with bracket up, please unscrew 4 screw at right and left side to change/install the new SSD/HDD. Finally, please reverse procedures to fix the SSD/HDD device. UPC-7210 Series User Manual...

  • Page 19: Vesa Mounting Installation

    VESA Mounting Installation You will need to prepare the VESA mount bracket in advance. Tighten 4 screws as shown below to attach the mounting brackets to the system. UPC-7210 Series User Manual...

  • Page 20: Pin Out For Com1

    DSR, Data set ready RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator Ground Signal Name RS-232 RS-422 RS-485 DATA- DATA+ Ground Ground Ground UPC-7210 Series User Manual...

  • Page 21: Setting The Jumpers

    When two pins of a jumper are encased in a jumper cap, this jumper is closed, i.e. turned On. When a jumper cap is removed from two jumper pins, this jumper is open, i.e. turned Off. UPC-7210 Series User Manual...

  • Page 22: Jumper & Connector Locations

    1 2 1 2 Motherboard location For motherboard setting, you must open the rear cover (Ref: section 2.1). We don't suggest you do this way because it may cause system lose warranty due to any unexpected actions. UPC-7210 Series User Manual...
  • Page 23 Jumper Name CMOS Data Clearance ME Register Clearance JP4 (For power) / LVDS Panel Power / Brightness Selections JP5 (For brightness) Factory Use Only 2.9.1 CMOS Data Clearance (JP2) Function Pin closed Illustration Normal (default) Clear CMOS UPC-7210 Series User Manual...
  • Page 24 Illustration Normal (default) Clear ME 2.9.3 LVDS Panel Power / Brightness Selections (JP4 / JP5) Notice: you cannot change this setting with UPC-7210 JP4: JP5: Jumper Function Pin closed Illustration 3.3V (default) 3.3V (default) Open Close UPC-7210 Series User Manual...
  • Page 25 CPU Fan connector CPU_FAN1 SATA III Port CN1, CN3 HDMI 1.4 Port Display Port GbE LAN Ports USB 3.0 Port CN7, CN8 DDR4 SO-DIMM Slot J2, J4 Mini-PCIe / mSATA Slot Factory Use Only J3, J9, J14 UPC-7210 Series User Manual...
  • Page 26 DSR, Data set ready detect RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal RI, Ring indicator ready Ground Assignment RS-232 RS-422 RS-485 DATA- DATA+ Ground Ground Ground UPC-7210 Series User Manual...
  • Page 27 2.10.2 Audio Connector (J1) Assignment Assignment Lineout_L Lineout_R JD_FRONT Ground LINEIN_L Linein_R JD_LINEIN Ground MIC_L MIC-R JD_MIC1 Ground 2.10.3 SATA HDD Power Connector (J5) Assignment Assignment Ground Ground +12V UPC-7210 Series User Manual...
  • Page 28 Orientation is not required when making a connection to this header. • Power LED: Pins 7 and 8 This connector connects to the system power LED on control panel. This LED will light when the system turns on. UPC-7210 Series User Manual...
  • Page 29 2.10.5 USB 2.0 Connector (J7) Assignment Assignment Ground Ground 2.10.6 Battery Connector (J10) Assignment Battery+ Ground UPC-7210 Series User Manual...
  • Page 30 TXD, Transmit data DTR, Data terminal ready Ground DSR, Data set ready RTS, Request to send CTS, Clear to send RI, Ring indicator Not Used 2.10.8 DC Power Input Connector (J13) Assignment +9V ~ +24V Ground UPC-7210 Series User Manual...
  • Page 31 2.10.9 Digital I/O Connector (J16) Assignment Assignment Ground OUT3 OUT1 OUT2 OUT0 2.10.10 LCD Backlight Connector (J19) Assignment Assignment +12V Brightness Control Backlight Enable Ground UPC-7210 Series User Manual...
  • Page 32 Assignment Assignment TX0P TX0N Ground Ground TX1P TX1N Ground Ground TX2P TX2N Ground Ground CLKP CLKN Ground Ground TX3P TX3N Power Power 4.2.13 CPU Fan Connector (CPU_FAN1) Assignment Assignment Ground CPU Fan In CPU Fan Out UPC-7210 Series User Manual...

  • Page 33: Chapter 3 Driver Installation

    Chapter 3 Driver Installation The information provided in this chapter includes: • ® Intel Chipset Software Installation Utility • VGA Driver • HD Audio Driver • LAN Driver • ® Intel Management Engine Drivers Installation...
  • Page 34 Plug & Play function for Intel chipset components. Follow the instructions below to complete the installation. 1. Insert the disk enclosed in the package with the board. Click Intel on the left pane and then Intel(R) Kabylake-U Chipset Drivers on the right pane. UPC-7210 Series User Manual...
  • Page 35 4. Accept the software license agreement and proceed with the installation process. 5. On the Readme File Information screen, click Install for installation. 6. After the installation, restart the computer for changes to take effect. UPC-7210 Series User Manual...
  • Page 36 3.3 Intel Graphics Driver Installation 1. Insert the disk enclosed in the package with the board. Click Intel on the left pane and then Intel(R) Kabylake-U Chipset Drivers on the right pane. 2. Click Intel(R) HD Graphics Driver. UPC-7210 Series User Manual...
  • Page 37 4. Click Yes to accept the license agreement and click Next until the installation starts. 5. On the Readme File Information screen, click Next until the installation starts. 6. After the installation, restart the computer for changes to take effect. UPC-7210 Series User Manual...
  • Page 38 3.4 HD Audio Driver Installation 1. Insert the disk enclosed in the package with the board. Click Intel on the left pane and then Intel(R) Kabylake-U Chipset Drivers on the right pane. 2. Click Realtek High Definition Audio Driver. UPC-7210 Series User Manual...
  • Page 39 3. On the Welcome screen of the InstallShield Wizard, click Next. 4. Click Next until the installation starts. 5. After the installation, restart the computer for changes to take effect. UPC-7210 Series User Manual...
  • Page 40 3.5 LAN Driver Installation 1. Insert the disk enclosed in the package with the board. Click Intel on the left pane and then Intel(R) Kabylake-U Chipset Drivers on the right pane. 2. Click Intel(R) PRO LAN Network Drivers.. UPC-7210 Series User Manual...
  • Page 41 5. On the Setup Options screen, click the checkbox to select the desired driver(s) for installation. Then click Next to continue. 6. The wizard is ready for installation. Click Install. 7. After the installation, restart the computer for changes to take effect. UPC-7210 Series User Manual...
  • Page 42 Management Engine Drivers Installation 1. Insert the disk enclosed in the package with the board. Click Intel on the left pane and then Intel(R) Kabylake-U Chipset Drivers on the right pane. 2. Click Intel(R) ME 11.x Drivers. UPC-7210 Series User Manual...
  • Page 43 3. When the Welcome screen appears, click Next. 4. Accept the license agreement and click Next until the installation starts. 5. After the installation, restart the computer for changes to take effect. UPC-7210 Series User Manual...

  • Page 44: Chapter 4 Bios Setup

    Chapter 4 BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: • Main Settings • Advanced Settings • Chipset Settings • Security Settings •...
  • Page 45 These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could make the system unstable and crash in some cases. UPC-7210 Series User Manual...
  • Page 46 4.3 Main Settings BIOS Setting Description System Date Sets the date. Use the <Tab> key to switch between the data elements. System Time Set the time. Use the <Tab> key to switch between the data elements. UPC-7210 Series User Manual...
  • Page 47 This section allows you to configure, improve your system and allows you to set up some system features according to your preference. 4.4.1 CPU Configuration Displays the type, ID and speed of the CPU. Note: The CPU information displayed varies upon your actual CPU type. UPC-7210 Series User Manual...
  • Page 48 Intel(R) Allows more than two frequency ranges to SpeedStep(tm) be supported. Intel(R) Speed Shift Enables / Disables Intel(R) Speed Shift Technology Technology support. Enabling will expose the CPPC v2 interface to allow for hardware controlled P-states. UPC-7210 Series User Manual...
  • Page 49 Enables / Disables Intel(R) DAL Host Interface Service (JHI). Core BIOS Done Enables / Disables Core BIOS done Message message sent to ME. Firmware Update Configures Management Engine Configuration Technology parameters. PTT Configuration Configures PTT capability or state. UPC-7210 Series User Manual...
  • Page 50 CIRA Configuration Configures remote assistance process parameters. ASF Configuration Configures Alert Standard Format parameters. Secure Erase Secures erase configuration menu. Configutation OEM Flags Configures OEM Flags. Settings MEBx Resolution Shows resolution settings for MEBx display Settings modes. UPC-7210 Series User Manual...
  • Page 51 Assistance Process Note: Network Access must be activated first from MEBx Setup. ASF Configuration BIOS Setting Description Enables / Disables PET events progress to PET Progress receive PET events. WatchDog Enables / Disables the watchdog timer. UPC-7210 Series User Manual...
  • Page 52 • Simulated performs SE flow without erasing SSD. • Real erases SSD. Force Secure Force Secure Erase on next boot. Erase OEM Flags Settings: BIOS Setting Description MEBx hotkey OEMFlag Bit 1: enables automatic MEBx Pressed hotkey press. UPC-7210 Series User Manual...
  • Page 53 MEBx password to default. MEBx Resolution Settings: BIOS Setting Description Non-UI Mode Resloution Sets resolution fro non-UI text mode. UI Mode Resolution Sets resolution for UI text mode. Graphics Mode Sets resolution for graphics mode. Resolution UPC-7210 Series User Manual...
  • Page 54 TPM Device Selects TPM device: PTT or dTPM. Selection • PTT enables PTT in SkuMgr. • dTPM 1.2 disables PTT in SkuMgr warning. PTT/dTPM will be disabled and all data saved on it will be lost. UPC-7210 Series User Manual...
  • Page 55 KT Device Enables / Disables IDER device. IDER Device Enables / Disables end of Post message End of Post sent to ME. Message Disables setting DOI3 bit for all HECI DOI3 Setting for devices. HECI Disable UPC-7210 Series User Manual...
  • Page 56 Enables / Disables endorsement hierarchy. Hierarchy TPM2.0 UEFI Spec Selects the supported TCG version based o Version your OS. • TCG_1_2: supports Windows 8 /10. • TCG_2: supports new TCG2 protocol and event format for Windows 10 or later. UPC-7210 Series User Manual...
  • Page 57 (OS/S4 Sleep State). This option may be not effective with some OS. ACPI Sleep State Selects an ACPI sleep state (Suspend Disabled or S3) where the system will enter when the Suspend button is pressed. UPC-7210 Series User Manual...
  • Page 58 1400 x 1050, 1366 x 768, 1600 x 1200, 1680 x 1050, 1920 x 1200, 1440 x 900, 1600 x 900, 1280 x 800, 1920 x 1080, 2048 x 1536 Brightness Control Enables / Disables the brightness control. UPC-7210 Series User Manual...
  • Page 59 Generate the reset signal when system Guardian hands up on POST. Schedule Slots Sets up the hour / minute / day for the power-on schedule for the system. Options: • None • Power On • Power On / Off UPC-7210 Series User Manual...
  • Page 60 BIOS Setup for UPC-7210 4.4.8 F81846 Super IO Configuration BIOS Setting Description Serial Ports Sets parameters of serial ports. Configuration Enables / Disables the serial port and select an optimal setting for the Super IO device. UPC-7210 Series User Manual...
  • Page 61 • IO = 3E8h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, • IO = 2E8h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, F81846 Serial Port Changes the serial port mode to RS-232 / 1 Mode Select 422 / 485. UPC-7210 Series User Manual...
  • Page 62 PC health status. CPU Shutdown Sets a threshold of temperature to shut Temperature down if CPU goes overheated. Options: Disabled / 70 °C / 75 °C / 80 °C / 85 °C / 90 °C / 95 °C UPC-7210 Series User Manual...
  • Page 63 4.4.10 CSM Configuration BIOS Setting Description Network Controls the execution of UEFI and Legacy PXE OpROM. UPC-7210 Series User Manual...
  • Page 64 The maximum time the device will take delay before it properly reports itself to the Host Controller. Auto uses default value for a Root port it is 100ms. But for a Hub port, the delay is taken from Hub descriptor. UPC-7210 Series User Manual...
  • Page 65 4.5.1 PCH-IO Configuration BIOS Setting Description SATA and RST SATA device options and settings Configuration PCH LAN Enables / Disables onboard NIC. Controller Wake on LAN Enables / Disables integrated LAN to wake Enable the system. UPC-7210 Series User Manual...
  • Page 66 SATA Controller(s) Enables / Disables the Serial ATA. SATA Mode Selects IDE or AHCI Mode. Selection Serial ATA Port Enables / Disables Serial Port 0 ~ 2. SATA Ports Hot Enables / Disables SATA Ports HotPlug. Plug UPC-7210 Series User Manual...
  • Page 67 4.6 Security Settings BIOS Setting Description Setup Administrator Sets an administrator password for the Password setup utility. User Password Sets a user password. UPC-7210 Series User Manual...
  • Page 68 Has no effect for BBS boot options. Boot mode select Selects a Boot mode, Legacy / UEFI / Dual. Boot Option Sets the system boot order priorities for Priorities hard disk, CD/DVD, USB, Network. UPC-7210 Series User Manual...
  • Page 69 Restore Defaults Restores / Loads defaults values for all the setup options. Save as User Saves the changes done so far as User Defaults Defaults. Restore User Restores the user defaults to all the setup Defaults options. UPC-7210 Series User Manual...

  • Page 70: Appendix

    Appendix This section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration. • I/O Port Address Map • Interrupt Request Lines (IRQ) • Watchdog Timer Configuration...

  • Page 71: I/O Port Address Map

    Programmable interrupt controller 0x000000B4-0x000000B5 Programmable interrupt controller 0x000000B8-0x000000B9 Programmable interrupt controller 0x000000BC-0x000000BD Programmable interrupt controller 0x000004D0-0x000004D1 Programmable interrupt controller 0x00000A00-0x00000A0F Motherboard resources 0x00000A10-0x00000A1F Motherboard resources 0x00000A10-0x00000A1F Motherboard resources 0x0000002E-0x0000002F Motherboard resources 0x0000004E-0x0000004F Motherboard resources 0x00000061-0x00000061 Motherboard resources UPC-7210 Series User’s Manual...
  • Page 72 Standard PS/2 Keyboard 0x00000064-0x00000064 Standard PS/2 Keyboard 0x0000F090-0x0000F097 Standard SATA AHCI Controller 0x0000F080-0x0000F083 Standard SATA AHCI Controller 0x0000F060-0x0000F07F Standard SATA AHCI Controller 0x0000F000-0x0000F03F Intel(R) HD Graphics 620 0x000003B0-0x000003BB Intel(R) HD Graphics 620 0x000003C0-0x000003DF Intel(R) HD Graphics 620 UPC-7210 Series User’s Manual...

  • Page 73: Interrupt Request Lines (Irq)

    Controller - 1.0 (Microsoft) IRQ 4294967291 Intel(R) HD Graphics 620 IRQ 4294967292 Intel(R) Ethernet Connection I219-V IRQ 4294967293 Standard SATA AHCI Controller Mobile 6th/7th Generation Intel(R) IRQ 4294967294 Processor Family I/O PCI Express Root Port #11 - 9D1A UPC-7210 Series User’s Manual...

  • Page 74: Watchdog Timer Configuration

    |= 0x52; Set_F81866_Reg(0xF5, bBuf); //count mode is second Set_F81866_Reg(0xF6, interval); //set timer bBuf = Get_F81866_Reg(0xFA); bBuf |= 0x01; Set_F81866_Reg(0xFA, bBuf); //enable WDTO output bBuf = Get_F81866_Reg(0xF5); bBuf |= 0x20; Set_F81866_Reg(0xF5, bBuf); //start counting //--------------------------------------------------------------------------- void DisableWDT(void) UPC-7210 Series User’s Manual...
  • Page 75 LD); Lock_F81866(); //--------------------------------------------------------------------------- void Set_F81866_Reg( unsigned char REG, unsigned char DATA) Unlock_F81866(); outportb(F81866_INDEX_PORT, REG); outportb(F81866_DATA_PORT, DATA); Lock_F81866(); //--------------------------------------------------------------------------- unsigned char Get_F81866_Reg(unsigned char REG) unsigned char Result; Unlock_F81866(); outportb(F81866_INDEX_PORT, REG); Result = inportb(F81866_DATA_PORT); Lock_F81866(); return Result; UPC-7210 Series User’s Manual...
  • Page 76 #define F81866_DATA_PORT (F81866_BASE+1) //--------------------------------------------------------------------------- #define F81866_REG_LD 0x07 //--------------------------------------------------------------------------- #define F81866_UNLOCK 0x87 #define F81866_LOCK 0xAA //--------------------------------------------------------------------------- unsigned int Init_F81866(void); void Set_F81866_LD( unsigned char); void Set_F81866_Reg( unsigned char, unsigned char); unsigned char Get_F81866_Reg( unsigned char); //--------------------------------------------------------------------------- #endif // F81866_H UPC-7210 Series User’s Manual...

  • Page 77: Onboard Connector Reference Types

    Hao Guo Xing Ye Connector WAFER396-2S-WV VHR-2N Dupon Digital I/O Dupon 2.00 mm-pitch pin Connector 2.00 mm-pitch (Female) header (Male) LCD Backlight E-CALL Connector 0110-161-040 PHR-4. J17 (1st channel), LVDS Hirose Hirose Connectors DF20G-20DP-1V DF20A-20DS-1C J18 (2nd channel) UPC-7210 Series User’s Manual...

This manual is also suitable for:

Upc-7210-i76Upc-7210-i73Upc-7210-i71

Table of Contents