Safety Precautions - adept technology T20 User Manual

NOTE: This provides supplementary information, emphasizes a point or pro-
cedure, or gives a tip for easier operation.

1.3 Safety Precautions

All personnel who install, operate, teach, program, or maintain the system must read
l
this guide, read the
responsibilities in regard to the robot.
All personnel who design the robot system must read this guide, the
l
Guide, and the Adept robot user's guide that was supplied with the equipment. The sys-
tem design must comply with all local and national safety regulations for the location
in which the robot is installed.
The robot system must not be used for purposes other than described in the Adept robot
l
user's guide that was supplied with the equipment. Contact Adept if you are not sure of
the suitability for your application.
The user is responsible for providing safety barriers around the robot to prevent anyone
l
from accidentally coming into contact with the robot when it is in motion.
Power to the robot and its power supply must be locked out and tagged out before any
l
maintenance is performed.
Chapter 1: Introduction
WARNING: This indicates a potentially hazardous electrical situation
which, if not avoided, could result in serious injury or major damage to
the equipment.
WARNING: This indicates a potentially hazardous situation which, if not
avoided, could result in serious injury or major damage to the equipment.
CAUTION: This indicates a situation which, if not avoided, could result
in minor injury or damage to the equipment.
DANGER: An Adept robot can cause serious injury or death, or damage
to itself and other equipment, if the following safety precautions are not
observed:
Adept Robot Safety
Adept T20 Pendant User's Guide, Rev. A
Page 8 of 50
Guide, and complete a training course for their
Adept Robot Safety