Using The Screen Saver; Setting The Initial Speed - adept technology T20 User Manual

Option
The table below describes the soft keys shown on the System Maintenance screen.
Soft Key
Info
Errors

4.2 Using the Screen Saver

You can enable a screen saver and specify the length of time without activity before the screen
saver is activated.
To use the screen saver:
1. From the Home screen, press Next to display Home screen 2.
2. Press Maint. The System Maintenance screen opens.
3. If necessary, press the up/down arrow buttons to select the Screen Saver field. Press OK.
4. Press the up/down arrow buttons to select the length of time before the screen saver is
activated. To turn OFF the Screen Saver, select Disabled.
5. Press OK to accept the change; press Cancel to revert to the previous setting.
NOTE: For maximum screen life, it is strongly recommended that you do not dis-
able the screen saver.

4.3 Setting the Initial Speed

You can specify "Normal" or "Slow" as the default speed setting when the system starts up.
"Normal" is the default setting. For more details, see Using the Pendant Controls and Indi-
cators on page 17.
To select the initial speed:
1. From the Home screen, press Next to display Home screen 2.
2. Press Maint. The System Maintenance screen opens.
3. Press the up/down arrow buttons to select the Initial Speed field. Press OK.
4. Press the up/down arrow buttons to select either "Normal" or "Slow" for the initial
speed.
5. Press OK to accept the change; press Cancel to revert to the previous setting.
Chapter 4: Maintenance
Pendant Firmware on page 41.
Accesses a screen that displays the system information from
the Adept controller. For details, see Displaying System Infor-
mation on page 42.
Accesses the error log. For details, see Displaying Recent
Errors on page 43.
Adept T20 Pendant User's Guide, Rev. A
Page 40 of 50
Description
Description