Chapter 4: Maintenance; The System Maintenance Screen - adept technology T20 User Manual

This chapter describes how to use the screen saver, update the pendant's firmware, trou-
bleshoot problems and maintain the pendant.

4.1 The System Maintenance Screen

The System Maintenance screen is used to set various pendant options, obtain information on
the system, and view the errors log.
The table below describes the options shown on the System Maintenance screen.
Option
Screen Saver
Initial Speed
Smart Locations
Approach
Update Firmware

Chapter 4: Maintenance

Figure 4-1. System Maintenance Screen
Enables/disables the screen saver and sets the screen-idle
time (Disabled, One Minute, Two Minutes, Five Minutes, Ten
Minutes, Twenty Minutes, One Hour). For details, see Using
the Screen Saver on page 40.
Sets the default speed used when the system starts up (Slow,
Normal). For details, see Setting the Initial Speed on page 40.
Enables/disables the Smart Locations feature, which organ-
izes the locations by type. For details, see Enabling the Smart
Locations on page 41.
Sets the approach distance (1 mm - 200 mm). For details, see
Setting the Approach Distance on page 41.
Updates the pendant firmware. For details, see Updating the
Adept T20 Pendant User's Guide, Rev. A
Page 39 of 50
Description