Current SILENT TRAC Installation Manual page 9

Starting in the middle, secure the track on each of the camlocks.
Push the track upward so the camlock features rest in the groove on
the top of the track.
Turn the camlock arm so the features inside the top track groove
bite in and hold the track in place. See Figure 22.
10. CONNECT THE MOTORS (Do not connect to power at this time)
On a single drapery, insert the motor shaft into the motor end of
the drapery track and twist the motor into place. The locking tab
will make an audible click when it locks into place. Proceed to step
7. See Figure 23.
On a dual drapery, insert Motor 1 (large) into the window-side
track motor end and twist the motor into place. The locking tab will
make an audible click when it locks into place. See Figure 24.
Next, insert Motor 2 (small) into the room-side track motor end
and twist the motor into place. The locking tab will make an audible
click when it locks into place. See Figure 25.
If you do no have a sensor box, plug the cord from Motor 2 into the
bottom of Motor 1. If you do have a sensor box, proceed to step 11.
See Figure 26.
Figure 22 - Push track up into camlock wings then turn arm to lock
Figure 23 - Attach primary motor
Figure 24 - Attach primary motor
Figure 25 - Attach secondary motor
Figure 26 - Plug secondary motor into primary motor
9