Current SILENT TRAC Installation Manual page 10

11. INSTALL AND CONNECT THE SENSOR BOX (Optional)
Place and install the sensor box behind the drapery in a place where
the Pendant is still accessible to the end user. Make sure to install
the sensor box at a height where both Primary and Secondary
motor cables can reach the sensor box. This also needs to be at a
location close enough to the window where the sensor box can
detect natural light coming in from the window. See Figure 27.
Figure 27 - Sensor box placement
Screw the wall plate into the desired location, using wall anchors if
necessary, then slide the sensor box over the wall plate until it sits
securely. See Figure 28.
Figure 28 - Attach sensor box to wall
On a single drapery, plug the motor into the Motor 1 slot. See
Figure 29.
Figure 29 - Motor plugged into slot
On a dual drapery, plug the room-side drapery into the Motor 1
slot and the window-side drapery into the Motor 2 slot. See Figure
30.
Figure 30 - Two motors plugged into slots
10