Current SILENT TRAC Installation Manual page 4

Find where the center of your track (CT) will be placed by measuring
the window opening (WO) and divide by two. See Figure 5.
Using a pencil, mark the location on the ceiling you want the center
of the track to be mounted. See Figure 6.
Next, determine the distance from the wall you want your drapery
track. Consider all factors, such as fullness of the drapery, fascia
return depth, drapery return length and drapery overlap at the
window sill. Decide on your distance carefully. After the track
installed, the clearance cannot be adjusted easily. We recommend
1" of clearance between the top of the drapery to the wall when the
drapery is on its open ("stacked back") state. See Figure 7.
Mark bracket placement for center and all other brackets carefully
along the ceiling. Be sure measurements ensure camlock installation
will be in a straight line. We suggest using a laser level in this process.
2. CHOOSE SPACER
Prior to mounting the camlocks to the ceiling, make sure the
appropriate spacers are chosen depending on the size of your
fascia. If fascia is not being used for this application, spacers are
not required. See Figure 8.
No Spacer
No Fascia
4
CT = WO
2
Figure 5
Figure 6
Figure 7
Small Spacer Large Spacer
3", 4", 7", and 11" Fascia 1.5" Fascia
Figure 8