Current SILENT TRAC Installation Manual page 12

1. CONNECT POWER
On battery powered units, untwist the Pendant end cap and insert
(6) or (8) D Alkaline batteries, negative end first. Twist the Pendant
lock to secure back onto the unit. See Figure 35.
Twist the Pendant lock to secure back onto the unit. See Figure 36.
On rechargeable battery powered units, twist the Pendant lock
to secure onto the unit. See Figure 37.
To charge the Pendant, plug the input of the charging cable provided
into the bottom jack of the Pendant. Plug the wall port into a desired
outlet. The Pendant does not need to be connected to the drapery to
charge. See Figure 38.
On low voltage units, twist the Pendant lock to secure onto the
unit. See Figure 39.
II. START UP
12
Figure 35 - Insert Batteries into the Pendant
Figure 36 - Screw the Pendant onto the Cord
Figure 37 - Screw the Pendant onto the Cord
Figure 38 - Connecting Pendant to Wall Outlet
Figure 39 - Screw the Pendant onto the Cord