Description Of Components - Binatone TP-4055 Instruction Manual

! To prevent uncontrolled spilling of water, do not incline the
thermopot, do not shake it and do not allow the appliance to
fall on the floor.
! Do not use the lid to carry the thermopot; always use the
special handle for this purpose.
! Do not distort the power cable and do not place it near a
source of heat. Do not wind the power cable around the
appliance and do not put heavy objects on the cable.
! Only use a dry cloth to remove dust from the power cable plug
or its contacts.
! While disconnecting the appliance from the power grid, to do
not pull the power cable - grasp hold of the plug and pull!
! Let the appliance completely cool down before cleaning or storing.
! Always disconnect the appliance from the power supply during
long-term storage, before filling the appliance with water or emp-
tying and before relocation of the appliance. While trans-porting
or storing the appliance make sure its empty of water.
DESCRIPTION
OF COMPONENTS
1. Casing (Fig. A)
2. Internal bulb
3. Removable lid (Fig. B)
4. Lid valve
5. Steam discharge port
6. Manual pump button
7. Lever for manual pump locking «Lock/Open»
8. Control panel (Fig. C)
Buttons:
«Boil» — boiling
«Dispense» — filling
«Unlock» — unlocking
Indicators:
«Boil» — boiling
«Keep warm» — warming
«Unlock» — unlocking
9. «Cup switch» valve
10. Water supply port
11.Handle
12. Rotating base
13. Water level scale
14.Power cable slot
15.Detachable power cable
16. Lid locking valve
17.Reset pin
6