Display And Keys; Function Modes - ensto ECO10LCDJR Installation And Operation Instructions Manual

5. DISPLAY AND KEYS

1. Operating mode (the active mode is in frame)
2. Title of the parameter when "7" is displayed
3. Temperature or parameter value when "7" is displayed
4. Sensor type
5. Heating indicator
6. Key lock
7. Installer or user menu number
8. Room or floor temperature indicator
Only in the user menu
Return button
(to exit current menu or reload
factory setting values)

6. FUNCTION MODES

Select function mode with the joystick. The selected mode is shown as a framed symbol
Timer Mode
Set a temperature that is valid for a specific time period.
Setting:
• Select override mode, activate the selection by pressing the joystick upwards.
• Press the joystick left / right to toggle between duration and temperature.
• When the value is flashing, press the joystick up / down to set:
Duration from 1h (hour) to 99d (days)
Temperature, adjustable between 5 and 37 ⁰C
• Save the settings by pressing the joystick.
1
7
2
Main switch
RAK78 / © Ensto 2018
8
3
5
6
4
Joystick
(to change mode or the
current value)
3