COBHAM EXPLORER 710 User Manual page 90

Automatic Context Activation (ACA)
With ACA enabled, the terminal automatically establishes a data connection when it is
registered on the satellite network.
Different types of connection packages have different setup for ACA:
Note
To set up automatic activation of your data connection, do as follows:
gearsalt
1. Click
2. Select Parameters.
3. Select Automatic Context Activation (ACA).
• When you select Automatic Context Activation (ACA) and connect to the LAN or
WLAN interface, the data connection is automatically established as soon as the
EXPLORER 710 and its BGAN connection are ready.
Note
• When you disable automatic activation (default), you can control the data connection
manually from the startup page.
98-140012-H
• For the predefined Standard (shared) connection package, ACA is disabled by
default but can be enabled.
• For a new shared connection package, ACA is disabled and cannot be enabled.
• For a dedicated DHCP connection, ACA is enabled by default and cannot be
disabled.
• For a dedicated static IP connection, ACA can be enabled or disabled.
in the right side of the tile with the connection package that you want to change.
You are charged for the data transferred. You may want to disable automatic
updates in your LAN or WLAN device to avoid unnecessary charges.
To set up your data connection packages
Chapter 4: To use the web interface
81