COBHAM EXPLORER 710 User Manual page 103

To restore factory settings
To restore the factory settings of the EXPLORER 710, do as follows:
1. Under Advanced, select Factory reset.
Important
2. Click OK.
The terminal will now restart and start up with the factory settings.
SIM PIN for BGAN
To enable or disable the use of a SIM PIN
To enable or disable the use of a PIN to access the BGAN network, do as follows:
1. Under Advanced, select SIM.
2. Select Enable/disable SIM PIN.
3. Under Enable/Disable PIN select or clear the box next to Require PIN on startup.
• If you clear the box, you can access and use the terminal without entering a PIN
• If you select the box, you must enter a PIN on startup before you can make calls or data
sessions
4. If you selected Require PIN on startup, type in the PIN next to Enter current PIN.
5. Click Save.
The new PIN settings will take effect at next power on.
To change the SIM PIN
To change the PIN used to access the BGAN network, do as follows:
1. Under Advanced, select SIM.
2. Select Change SIM PIN.
3. Under Change PIN type in the Current PIN.
4. Type in the New PIN and retype it on the next line.
5. Click Save. The new PIN settings will take effect at next power on.
SIM lock
The SIM lock feature can be used by suppliers to lock your SIM card to a specific provider or
distribution partner. For further information, contact your supplier.
98-140012-H
All configuration will be lost and the EXPLORER 710 will return to the default
configuration.
Advanced settings
Chapter 4: To use the web interface
94