Multifunction Display - Digital Clock - KYMCO DOWNTOWN 300i 2011 Owner's Manual

MULTIFUNCTION DISPLAY – DIGITAL CLOCK
Multifunction Display – Digital Clock
The clock indicates the time in hours and minutes when the ignition is
"ON".
To adjust the clock's time manually, follow this procedure:
1. Turn the ignition switch "ON".
2. Press and hold the ADJUST button for more than two seconds
to select the ODO mode.
NOTE: The digital clock can be only adjusted in ODO mode,
don't select the trip meter or oil service meter mode if you want
to adjust the time on the clock.
3. Press and hold both the MODE button and ADJUST button at
the same time for more than two seconds. The "hour" digits will
begin flashing, indicating the clock time can be adjusted.
4. To set the hour display, press the ADJUST button until it
displays the correct "hour" time.
5. To change the minute display, press the MODE button until the
"minute" digits begin flashing.
6. To set the minute display, press the ADJUST button until it
displays the correct "minute" time.
7. To end the clock adjustment, press both the MODE and
ADJUST buttons at the same time. The display will stop flashing
automatically. The adjustment will be cancelled if any button is
not pressed within approximately ten seconds.
19