Canceling A Print Job - Xerox workcentre PRO 580 User Manual

All manuals and user guides at all-guides.com
N
OTES
• Most Windows applications will override settings you
specify in the printer driver. Change all print settings
available in the software application first, and any
remaining settings with the printer driver.
• The settings you change here remain in effect while you
are using the current program. To make your changes
permanent, make them in the Printers folder as follows:
1. Click the Windows Start button.
2. Select Settings , then Printers to open the Printers
3. Select the WorkCentre Pro 580 .
4. Click the right mouse button and select Properties or
Document Defaults depending on your operating system
to open the properties window.

Canceling a Print Job

There are two ways to cancel a print job:
• If your print job has not started to print, cancel from the
print spooler in Windows 95, 98, or NT 4.0.
• If your print job is currently printing, press the Stop button
twice on the front panel of the WorkCentre Pro 580.
CAUTION
received, this procedure will also clear it.
4.14 Printing
:
window.
: If a fax job is currently being transmitted or