Dreamline LINEA SHDR-3230721 Series Installation Instructions Manual

Shower panel

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

HOWER

PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION

LINEA

SHDR-3230721-##

SHDR-3234721-##

LINEA

Shower Screens: Two

Individual Panels

SHDR-3230302-##

SHDR-3230342-##

SHDR-3234302-##

SHDR-3234342-##

## = finish

IMPORTANT!

DreamLine

reserves the right to alter, modify or redesign products at any time without prior notice for the

purpose of product improvement and customer experience. Please refer to the model's web page on

DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional

product details.

Do Not Return Product to the Store. Contact DreamLine® with any questions

LINEA Shower Panel Installation Manual Ver 2 082021

LINEA

ANEL

NSTALLATION

*right wall installation shown

01 - Chrome 04 - Brushed Nickel 06 - Oil Rubbed Bronze 09 - Satin Black

LINEA

w/ Towel Bar

SDLI30W720XTX##

SDLI34W720XTX##

LINEA

Shower Screens: Two

Adjacent Panels

SHDR-3230303-##

SHDR-3230343-##

SHDR-3234303-##

SHDR-3234343-##

1-866-731-2244

NSTRUCTIONS

Table of Contents

Need help?

Do you have a question about the LINEA SHDR-3230721 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Dreamline LINEA SHDR-3230721 Series

Page 1 ® purpose of product improvement and customer experience. Please refer to the model’s web page on DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional product details. Do Not Return Product to the Store. Contact DreamLine® with any questions 1-866-731-2244 ©2021 DreamLine®...
Page 2 For best results, squeegee the glass after each use and dry with a soft cloth. Record the following purchase information for your records or in the event you need to contact DreamLine ® Purchase Order...
Page 3: Table Of Contents
Table of Contents Section Title Page # ® ClearMax Coating Information — Warnings and General Preparation Model Specific Preparation Tools Detailed Diagram of Shower/Tub Door Components Parts List Model Diagram Installation Steps: LINEA Single Panel Installation 9-21 LINEA Single Panel with Towel Bar Assembly Installation LINEA Shower Screens: Two Individual Panels Installation LINEA Shower Screens: Two Adjacent Panels Installation 24-31...
Page 4: Warnings And General Preparation
IMPORTANT GENERAL PREPARATION • DreamLine® reserves the right to alter, modify or redesign products any time without • After opening all boxes and packages, read this introduction carefully. Check that all the prior notice for product improvement and customer experience. Please refer to the items are included in the package by marking off the components on the “Detailed...
Page 5: Model Specific Preparation
Model Specific Preparation 5/8” (15.8mm) minimum REQUIRED: threshold 1/2” (12.7mm) Out-of-Plumb 5/8”(15.8mm) Adjustment on the minimum Vertical U-Channel ±0.0 ±0.0 threshold Only; Verify threshold and walls with a level Threshold must be level ±0.0 ±0.0 Threshold must be level single panel installation shower screen: shower screen: *also applies to...
Page 6: Tools
Diagram on pages 5-6; and packing list in this manual as a reference. Before discarding the carton, check for small hardware bags that may have fallen to the bottom of the box. If any NOTE parts are damaged or missing, please contact DreamLine for replacement. The shipping ®...
Page 7: Detailed Diagram Of Shower/Tub Door Components
Detailed Diagram of Shower Panel Glass Components LINEA SHDR-3230721-## SHDR-3234721-## LINEA Shower Screens: Two Individual Panels SHDR-3230302-## SHDR-3230342-## SHDR-3234302-## Install the surface with the ClearMax SHDR-3234342-## right wall panel installation shown label towards the inside of the shower. ©2021 DreamLine® All Rights Reserved.
Page 8 Detailed Diagram of Shower Panel Glass Components LINEA LINEA with Towel Bar Shower Screens: Two SDLI30W720XTX## Adjacent Panels SDLI34W720XTX## SHDR-3230303-## SHDR-3230343-## SHDR-3234303-## Install the surface with the ClearMax label towards the inside of the shower. SHDR-3234343-## right wall panel installations shown ©2021 DreamLine® All Rights Reserved.
Page 9: Parts List
Parts List *Towel Bar (#05) is only available with the Linea with Towel Bar model. NOTE *90° Degree Top Corner Bracket (#30) is only available with the Linea Shower Screens: Two Adjacent Panels model. LINEA Shower Panel Installation Manual Ver 2 082021...
Page 10: Model Diagram
72” (1828.8mm) For more information see Pages 23-31. Recheck the finished opening size before beginning the installation. Specific model size information can be found on DreamLine.com. *22” (558.8mm) minimum LINEA Shower Screen: Adjacent Panels shown LINEA Shower Panel Installation Manual Ver 2 082021...
Page 11: Installation Steps: Linea Single Panel Installation
Installation Steps: Single Panel Installation The Vertical U-Channel (#09) allows for up to 1/2” (12.7mm) of out-of-plumb adjustment; verify the walls and threshold with a level ±0.0 ±0.0 before proceeding with the installation. 1/2” wall ±0.0 ±0.0 surface glass edge Fig 1 right wall single panel installation shown Prior to beginning the installation, confirm that all surfaces are...
Page 12 Panel Glass Width (W) 3/16” (4.78mm) Add 3/16” to the width of NOTE the glass to allow proper clearance for the thickness of the Vertical U-Channel. Panel Glass Height (H) Parts Needed Fig 2 Tools Needed LINEA Shower Panel Installation Manual Ver 2 082021...
Page 13 Cut the Bottom U-Channel to: Glass Width (W) (+) 3/16” (4.78mm) = (L)** (see EXCEPTION below) Fig 3a Cut the Vertical U-Channel to: Glass Height (H) (-) 13/16” (20.6mm) = (V) (for 72” model height, V= 71” (1803.6mm) Fig 3b Cut the Vertical U-Channel to 71”...
Page 14 Mark at least three (3) holes for Fig 4 the Bottom U-Channel (#29). right wall single panel installation shown Tools Needed LINEA Shower Panel Installation Manual Ver 2 082021...
Page 15 ◾For installation into an Acrylic Threshold: drill an Ø1/8”(3mm) hole and use the ST4.2 x 40mm Countersunk Screw (#23) NOTE ◾For installation into a Tile Threshold: drill a Ø3/16”(4.76mm) hole up to the stud, drill an Ø1/8” (3mm) pilot hole into the stud and use the ST4.2 x 40mm Countersunk Screw (#23) Fig 5 right wall single panel installation shown...
Page 16 Fig 6 right wall panel installation shown To prevent damage to the glass: Fully countersink the screws so the screw heads do not stick up above the Parts Needed surface of the Bottom U-Channel (#29) Tools Needed LINEA Shower Panel Installation Manual Ver 2 082021...
Page 17 Fig 7a 2” (50.8mm) Fig 7b Parts Needed Tools Needed Cut several 2”- 3” (50.4mm-76.2mm) pieces of the PVC Glass Spacer 0.5mm (#34). DO NOT install one long continuous piece into the Bottom U-Channel (#29) LINEA Shower Panel Installation Manual Ver 2 082021...
Page 18 NOTE The Vertical (#09) U-Channel sits on top of the Bottom (#29) U-Channel. Fig 8 right wall single panel installation shown NOTE 1/2” For the single panel installation, it is optional to dry-fit the Panel Glass (#11) into the u-channels before marking the Vertical U-Channel (#09) position on the wall.
Page 19 ◾If a stud is present behind the wall: NOTE drill a Ø3/16”(4.76mm) hole up to the stud, drill an Ø1/8” (3mm) pilot hole into the stud and use the ST4.2 x 40mm Countersunk Screws (#23) ◾If no stud is present behind the wall: drill a Ø5/16”(8mm) hole and insert the Wall Anchors (#13) and use the ST4.2 x 40mm Countersunk Screws (#23).
Page 20 The Vertical (#09) U-Channel NOTE sits on top of the Bottom (#29) U-Channel. Fig 11 right wall single panel installation shown To prevent damage to the glass: Parts Needed Fully countersink the screws so the screw heads do not stick out from the surface of the U-Channels.
Page 21 Fig 12 right wall panel installation shown Parts Needed After applying silicone into the Bottom U-Channel, install several Tools Needed NOTE 2”- 3” pieces of the PVC Glass Spacer 0.5mm (#34) into the Bottom U-Channel (#29) to protect the bottom edge of the glass. (Fig 12.3) LINEA Shower Panel Installation Manual Ver 2 082021...
Page 22 Fig 13 right wall panel installation shown Slide the panel glass into the first and then Vertical U-Channel (#09) NOTE slide it down into the Bottom U-Channel (#29) Tools Needed Install the surface with the ClearMax label towards the inside of the shower. LINEA Shower Panel Installation Manual Ver 2 082021...
Page 23 The surfaces need to be clean and free of debris before applying silicone NOTE Hours Fig 14 right wall single panel installation shown Allow 24 hours for the silicone to cure before using the shower This completes the installation of the LINEA single panel. ◾For LINEA with Towel Bar installation, proceed to the next step.
Page 24: Linea Single Panel With Towel Bar Assembly Installation
LINEA with Towel Bar Assembly Installation Install the surface with the ClearMax label towards the inside of the shower. This model is fully reversible. The installation is shown with the right wall single panel orientation in Fig. 15a. For installation of the left wall single panel, simply NOTE reverse the orientation of your installation and begin on the opposite wall.
Page 25: Linea Shower Screens: Two Individual Panels Installation
LINEA Shower Screens: Two Individual Panels Installation Install the return panel first Install the surface with the ClearMax label towards the inside of the shower. This model is fully reversible. The installation is shown with the return panel to the right in Fig. 16a. For installation with the return panel to the left, simply NOTE reverse the orientation of your installation and begin on...
Page 26: Linea Shower Screens: Two Adjacent Panels Installation
LINEA Shower Screens: Two Adjacent Panels Installation Install the return panel first Install the surface with the ClearMax label towards the inside of the shower. This model is fully reversible. The installation is shown with the return panel to the right in Fig. 17a. For installation with the return panel to the left, simply NOTE reverse the orientation of your installation and begin on...
Page 27 LINEA Shower Screens: Two Adjacent Panels Installation Use a carpenter’s square for accuracy when marking the threshold Tools Needed Return Panel Inline Glass Width (W) Panel Glass 3/16” Width (W) (4.78mm) Inline Add 3/16” to the width of Panel the glass to allow proper Glass NOTE clearance for the thickness...
Page 28 Cut the Return Panel Bottom U-Channel to: Glass Width (W) + 1/2” (12.7mm) = (L)** (see EXCEPTION below) Fig 20a Plumb line **EXCEPTION: If the wall is out-of-plumb at the bottom, dry-fit the Vertical 45° (#09) and Bottom (#29) U-Channels onto the Panel Glass Out-of-plumb and place into the finished at the bottom...
Page 29 U-channel sideview wall Bottom U-Channel (#29) threshold Parts Needed Fig 22a Fig 22b Tools Needed NOTE Measure at the bottom and draw a plumb line up from the threshold Use at least four (4) screws to attach the Vertical U-Channel (#09) and three (3) NOTE to attach the Bottom U-Channel (#29).
Page 30 Fig 24 ◾If a stud is present behind the wall: ◾For installation into an Acrylic Threshold: drill a Ø3/16”(4mm) hole to the stud, drill an drill a Ø1/8”(3mm) hole and use the ST4.2 x 40mm Ø1/8”(3mm) pilot hole into the stud and use Countersunk Screw(#23) the ST4.2 x 40mm Countersunk Screws (#23).
Page 31 If necessary, add additional PVC Glass Spacers 0.5mm (#34) into the Bottom U-Channel (#29) to level the panel glass. Do Not Exceed 1/4” (6mm) of vertical adjustment. Return Panel Glass must match the installed other panel glass at the standard model height of 72” (1829mm). Parts Needed Tools Needed Fig 26...
Page 32: 90° Degree Top Corner Bracket Installation (*Exclusive To Two Adjacent Panel Installation)
inline panel overhead view Fig 28 Parts Needed If necessary, add additional PVC Glass Spacers 0.5mm (#34) into the Tools Needed Bottom U-Channel (#29) to level the panel glass. Do Not Exceed 1/4” (6mm) of vertical adjustment. Return Panel Glass must match the installed other panel glass at the standard model height of 72”...
Page 33 The surfaces need to be clean and free of debris before applying silicone. NOTE Hours Apply a bead of 100% silicone on the inside corner of the shower where the two glass panels intersect. Fig 30 right wall adjacent panels installation shown Tools Needed Allow 24 hours for the silicone to cure before using the shower LINEA Shower Panel Installation Manual Ver 2 082021...
Page 34: Product Maintenance
To maximize the life of your door, it is important to regularly inspect the glass and other hardware for misalignment, proper attachment, NOTE and/or damage. Contact DreamLine with any questions or concerns. ® LINEA Shower Panel Maintenance Checklist ◻...
Page 35: Troubleshooting
•Check all shipping/packaging material for missing parts/components. Missing Parts ―― •If not found, contact DreamLine Customer Support [1-866-731- 2244] to order factory part replacement. •Confirm that all screws are tightly secured to the threshold Water Leakage: beneath the Bottom U- •Inspect the silicone caulk and ensure that a complete application of...
Page 36: Factory Parts Information
1 pc. BOLD digit indicates finish: 1 = Chrome; 4= Brushed Nickel; 6 = Oil Rubbed Bronze; 9= Satin Black Contact Support@DreamLine.com for Part replacement, installation assistance or additional information. Complete Warranty information is available on DreamLine.com. ©2021 DreamLine® All Rights Reserved.
Page 37 1 pc. BOLD digit indicates finish: 1 = Chrome; 4= Brushed Nickel; 6 = Oil Rubbed Bronze; 9= Satin Black Contact Support@DreamLine.com for Part replacement, installation assistance or additional information. Complete Warranty information is available on DreamLine.com. ©2021 DreamLine® All Rights Reserved.
Page 38 2 pcs. BOLD digit indicates finish: 1 = Chrome; 4= Brushed Nickel; 6 = Oil Rubbed Bronze; 9= Satin Black Contact Support@DreamLine.com for Part replacement, installation assistance or additional information. Complete Warranty information is available on DreamLine.com. ©2021 DreamLine® All Rights Reserved.
Page 39 2 pcs. BOLD digit indicates finish: 1 = Chrome; 4= Brushed Nickel; 6 = Oil Rubbed Bronze; 9= Satin Black Contact Support@DreamLine.com for Part replacement, installation assistance or additional information. Complete Warranty information is available on DreamLine.com. ©2021 DreamLine® All Rights Reserved.

This manual is also suitable for:

Linea shdr-3234721 series Linea shdr-3230302 series Linea shdr-3230342 series Linea shdr-3234302 series Linea shdr-3234342 series Linea sdli30w720xtx series ... Show all

Dreamline LINEA SHDR-3230721 Series Installation Instructions Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dreamline LINEA SHDR-3230721 Series

Summary of Contents for Dreamline LINEA SHDR-3230721 Series

This manual is also suitable for:

Table of Contents