Table of Contents
Advertisement
b)
Installation in which for a time the product flows through the pipe to a tank, and after
that a quantity of the product comes back in the opposite direction. The
programming will be:
Positive flow rate action: Increase
Negative flow rate action: Decrease
The totalizer will indicate the volume of product that there is in the tank.
b)
Installation in which for a time a first product flows through the pipe, and after that a
second product flows in the opposite direction. The programming will be:
Positive flow rate action: Increase
Negative flow rate action: Increase
The totalizer will indicate the volume corresponding to the sum of the two products.
6.8
Backlight
This screen allows to select how long it will take the backlight to turn off from the moment
you release a key.
6.9
Programs
It allows to
save the device programming, retrieve it or load a default configuration.
If at any time you want all the transducer installation data to be stored in memory as backup,
it can be done by selecting "Save user prog.".
To restore these data, just select "Load user prog. ".
7
SOFTWARE VERSION
From the main menu, if "Software version" is selected, the screen will show this data and the
corresponding date.
34
Advertisement
Table of Contents
