Iron Volume; Reactivity - XP Metal Detectors DEUS II Manual

MENU

Iron volume

MENU
78 90
IRON VOLUME
T.ID G.ID
3

REACTIVITY

I 2.5
AUDIO RESPONSE I 4
Reactivity
MENU 90
REACTIVITY
T.ID G.ID
2.5
AUDIO RESPONSE I 4
DISCRI I 6.0
EXPERT
machine more sensitive to deep targets.
On a beach, as the targets are most often well away from each other, the low Reactivity levels like 0 or 1
netic black sand or beaches with variable salinity, increase the Reactivity to 2.5 or 3, thereby becoming
more selective and more stable, which will make it far easier for you to interpret the targets.
Recommended settings :
0 to 1 Large masses and coins, in ground not contaminated by ferrous items.
2 to 2.5 General use, ground with little iron contamination.
3 to 5 iron-contaminated and/or mineralized ground.
R 0 - R 1
No
sound
R 2 - R 3
Short
sound
R 4 - R 5
Full
sound
20
crimination setting, which normally means iron.
0 = cut-off low tones
is a fast and selective detector! Reactivity is a vital setting that deter-
mines the detector's performance in terms of how quickly it analyzes the signal
several targets located close together. This is also known as Recovery speed.
If the soil contains a great deal of iron, hot rocks or other mineralized debris,
soil penetration can be drastically reduced as can the ability of a detector to
locate non-ferrous targets next to ferrous targets. In these conditions, select a
high degree of reactivity which will help to speed up the signal analysis. On the
other hand, if the ground is "clean", it is better to reduce the Reactivity, to make the
the surface then over a good metal target (ring).
With a low Reactivity level, the iron is detected for
longer and completely hides the ring.
With a medium Reactivity level, you begin to detect the
ring. The audio signal partially indicates the target.
A high Reactivity level enables you to distinguish the
ring completely from the iron. The audio signal fully
indicates the target.
5 = maximum low tone level
-
-