Iron Level - XP Metal Detectors DEUS User Manual

MENU
FREQ.
IRON VO.
REACTIVITY
AUDIO RESP.
MENU
DISC IAR
TONE
SENS
FREQUENCE
12
Adjust the Iron Volume (from 0 to 5) with
Exit with
You have the option of controlling the sound volume of the low-pitched
tone which generally corresponds to iron. Depending on the circumstances,
this enables more attention to be paid to other sounds, by reducing those
generated by iron.
On the other hand, some users prefer that the low-pitched signals from
iron are more audible, as they know that good targets at the detector's
range limit in mineralised ground sometimes generate low amplitude,
low-pitched sounds.
- At 0 the low-pitched tone is cut o .
- At 5 the low-pitched tone will have a sound level equivalent to other medium
- or high-pitched tones.
If the discrimination threshold is too low, 0 or 2 for example,
most iron will generate not low- but medium-pitched tones, as you will
practically be in the All Metals mode. In this case, the iron level setting
will not be of much use.
TONE (
The TONE function is available only in the program 10 "GOLD
FIELD". It allows to set the fundamental frequency of the audio
pitch signal.
Adjust the tone from 150 to 603 Hz with
HZ
Exit with
)
prog. 10 only