Pinpointer; Mi-6 Active Display Screen; Sensitivity; Audio Pitch/Audio Pulse - XP Metal Detectors DEUS II Manual

PINPOINTER

When connected, the MI-6 pinpointer transmits its audio signal directly to DEUS II; a new menu will now
be available with extended functions. (refer to the MI-6 Manual)

MI-6 active display screen

Sensitivity

PINPOINTER
SENSITIVITY
30
TONE
AUDIO
SAVE
you will automatically reduce the detection zone and localise far better. Retrieve full sensitivity by press-
Tone
PINPOINTER
TONE
1582 Hz
AUDIO
SENSITIVITY
SAVE

Audio PITCH/Audio PULSE

PINPOINTER
AUDIO
PITCH
SENSITIVITY
TONE
SAVE
Programs and Save
Choose from one of the 3 factory pre-set programs in the menu to create your own custom program
which can then be saved as (prg 4).
Press , modify your settings and save them by pressing
MENU
The 4 programs on the remote control are separate from the programs inside the pinpointer. When used
independently the MI-6 (unpaired) will always use its factory programs.
Recover a lost MI-6
In Option > Pairing > Pinpointer > Select, choose
several weeks.
36
pinpointer transmits its au
MI-6 Battery level
Access to :
SENS - TONE - AUDIO
The MI-6 has 50 levels of sensitivity via the remote control.
-
+
Press to increase or decrease the MI-6 sensitivity.
RETUNE: Recalibrate the MI-6 threshold regularly by pressing its button very brief-
ly, keeping away from any metallic source.
Modify the low/high audio tone of the PULSE Mode from 100 to 1582 Hz.
-
+
Press or
Audio PITCH : The sound varies in tone and intensity, it is the default mode and
offers fast target location.
Audio PULSE : Has a higher sound, intended for noisy environments. Target loca-
tion, PULSE is not as precise as PITCH mode. Pitch and Pulse modes both have
the same performance.
-
+
Press or to switch from one mode to another.
program number
PRG 2
MENU
-
+
or .
. Prg. 4 is created.
SAVE
and press
RECOVER SELECT
Target zoom screen
.