Ws6; Ws6 Master/Slave; Menu - XP Metal Detectors DEUS II Manual

WS6

1
RC
WS6 SLAVE
WS6 slave of the remote.
(965g with coil 22cm)
The remote control is master and
controls the coil, the functions and
the settings
Note: The WS6 can be replaced by the
WSAII/WSA II XL/BH-01 and FX03.
headphones
WS6 SLAVE
WS6 MASTER
To move the WS6 from slave to master, it has to be re-started with the remote control switched OFF. It will
COIL (see WS6 manual online).
Alternates coil charging level and
Name & Program No. (change with + -)
Decrease programs and values
Long press from main screen :
SHORTCUT to VOLUME
In Option long press: EXPERT
In Menu: Back
Long press from main screen :
SHORTCUT to GRAB
Indicates the link with the coil
The remote control programs are separate from the internal WS6 programs. When using the WS6 inde-
control programs are never transferred to the WS6.
Full WS6 manual at www.xpmetaldetectors.com
The WS6
trol, they can be a stand alone unit and connect with the coil for an extremely
and mounted on the stem to make the most of the control screen, the target
display and all the settings. It is then ideally supplemented by the WSA II or
WSAII XL wireless headphones.
2
WS6
WS6 MASTER
(+ wireless headphones)
WS6 Master in a comfortable
the settings and displays the targets.
- Identical performance.
- Very detailed graphic screen.
- Connect the headphones WSA II/
WSAII XL/Wired, etc. to the WS6
WS6
Mode
WIRELESS HEADPHONES
3
WS6
WSAII
(810g with coil 22cm)
the settings and displays the targets.
- Identical performance.
- Very detailed graphic screen.
and
Increase programs and values
Long press from main screen:
SHORTCUT GO TERRAIN PUSH
MENU : DISCRI/SENS/...
• Long press from menus: EXPERT
mode
• Long press from main screen: PIN-
POINT MODE
• From Option: backwards
F/NF (ferrous/non-ferrous) and target
strength
USB min. B charge and update.
WS6 MASTER
(WS6 only)
WS6 module clipped to the
backphones
(750g with coil 22 cm).
.
Manual switch ON
and manual Switch OFF
-
WS6
33