Audio; Audio Output; Equalizer - XP Metal Detectors DEUS II Manual

OPTION/AUDIO
One of the many innovations of
also choose the type of sound you would like for your detecting sessions from a sound library.
Audio Out
Press
OPTION
90

AUDIO

T.ID G.ID
Select the Audio output and your desired volume with
SETTINGS
SPEAKER - WIRELESS HEADPHONES - BH01 - WIRED HEADPHONES
PROGRAM
SELECT
Alter the volume with
OPTION
90
The wireless headphone volume is controlled by the remote control or the + and -
AUDIO OUT
keys on the headphones.
T.ID G.ID
2
Note that you can use the following audio outputs at the same time :

EQUALIZER

AUDIO TYPE
• wireless headset + speaker
• wireless headset + wired headset
• wireless headset + BH-01 headset
The remote control battery life is 30 h on the wireless headphones output, but drops to 15 h with the
loud speaker or active BH-01 headphones, even at level 1. Disable the unused outputs by moving them
to 0 to increase battery life.
To alter the wireless headphone volume from the remote control or hear the beep from the remote control
keys in the headphones, it is essential that a search coil is paired.
Equalizer
Over and above a simple low/high audio setting, the equalizer can correct the
90
acoustics of the loud speaker and headphones over four bands to match them to
T.ID G.ID
your hearing preferences. You can thus set the low tones to around 150 Hz, the
medium low to around 450 Hz, the medium high to around 2000 Hz and the high
150 450 2K 4K
to around 4000 Hz.
0 dB
OFF
Press
Choose the audio frequency range that you wish to alter with
decrease the level.
ON/OFF: You can compare your settings quickly by switching OFF the Equalizer.
26
incorporates the very latest in audio processing. You can now
> .
OPTION AUDIO
-
and
> >
OPTION AUDIO EQUALIZER
+
.
>
SELECT
.
-
+
or for 2 sec.
, increase or