XP Metal Detectors DEUS II Manual page 19

Type of target detected is largely de-
pendent on the frequency:
These graphics illustrate the sensi-
tivity and the ability to discriminate
ferrous items depending on the fre-
quency as well as the advantage of
multi-frequency programs as they
cover a wide spectrum of targets.
gram that can vary depending on the
programs and ground conditions.
FMF multi frequency programs
MENU Manual :
78 90
FREQ SHIFT
T.ID G.ID
Automatic :
5
IRON VOLUME I 3
REACTIVITY I 2.5
SCAN
Mono-frequency program
Press
MENU
78 90
FREQUENCY
T.ID G.ID If you are experiencing too much interference:
25.5
KHZ
Press
IRON VOLUME I 3
ic frequency scan by pressing
REACTIVITY I 2.5
EXPERT
4 kHz
Large, mainly ferrous and non-ferrous masses, coins grouped together or high conductivity coins.
8 kHz
General use. Coins and large masses, militaria. Medium and small targets in low-mineralized ground.
12 to 20 kHz
General use, small coins. Coins of all sizes in moderately to highly mineralized ground.
30 to 45 kHz
ground, non-magnetic.
-
SMALLER
TARGET
FMF
40 kHz
35 kHz
28 kHz
21 kHz
15 kHz
7 kHz
4 kHz
-
Press or
+
Press to start an automatic scan.
SCAN
-
or + to select one of the 7 main frequencies.
then shift the main frequency with
EXPERT
IRON DISCRIMINATION
CAPABILITY
MEDIUM
TARGET
-
and
.
SCAN
MENU
LARGER
TARGET
or start an automat-
+
-
19