Delete Coil; Pair Wireless Headphones; Delete Wireless Headphones; Pair Mi-6 Pinpointer - XP Metal Detectors DEUS II Manual

OPTION/PAIRING
Delete a coil from the list
Choose the coil to delete then
VALID
Pairing XP wireless headphones
OPTION AUTOMATIC:
90
PAIRING
phone logo when starting the remote control. The remote control will invite you to
T.ID G.ID
pair it by pressing the
MANUAL:
AUDIO
press
SETTINGS
SELECT
It is impossible to pair a second set of headphones if there is one already paired. In this case, simply
delete the original set of headphones from the remote control beforehand.
Delete XP wireless headphones
OPTION 90
UNPAIR
G.ID
T.ID
Press
START
SELECT
Pairing the MI-6 Pinpointer
Press
OPTION
90
PAIRING
T.ID G.ID
Switch on the MI-6 whilst holding its button down for eight seconds. You will see the
serial number of your pinpointer displayed on the remote control. Then switch on
AUDIO
the MI-6 so that it works with
SETTINGS
SELECT
When pairing, the MI-6 automatically switches to program 7. This program will only
work with the detector and headphones. In this program the MI-6 will not generate
any sound or vibration through it's own speaker (MI-6 manual).
Delete the MI-6 from the remote control
OPTION
OPTION
90
UNPAIR
T.ID G.ID
To use the MI-6 without the
change program : Switch MI-6 on - press the button for 5 seconds, an audio chime
RESEARCH
indicates that you have entered the program selection mode. Press to correspond
with the desired program number (e.g. press twice for program 2). After 2 seconds
SELECT
the audio chime indicates the MI-6 has returned to search mode.
32
coil/wireless headphones/pinpointer
. Delete all digits with
EDIT
.
YES
If no wireless headphones are paired, choose the wireless head-
Press
OPTION
and switch on the headphones by holding the
SELECT
>
OPTION PAIRING
UNPAIR > SELECT > YES
then
OPTION PAIRING
.
SELECT
> , Pinpointer logo choose
PAIRING
then add 6 zeros "000000". Press
key on the headphone module for two seconds.
-
> , with or
PAIRING
-
, with or + choose the headphone, then
.
with . Choose Pinpointer logo with
and its wireless headphones.
UNPAIR
, select programs 1 to 6 on the MI-6 menu. To
+
. Choose the headphone then
key down for 8 s.
, then
SELECT
>
SELECT
+
then
.
YES