Charge; Battery Life - XP Metal Detectors DEUS II Manual

POWER SUPPLY - BATTERIES

Charge

The coil, remote control and headphones are powered by a Lithium battery (LiPo). Please use the mains
unit supplied that can charge the three components simultaneously using the lead-output cable.
The three components (coil/remote control/headphones) can be charged by any USB mains
!
Under no circumstances can XPLORER (XP METAL DETECTORS) be held liable for damage or
in force.
• Connect the USB plug to the power supply.
• Plug the round connector into the remote control and the two USB min. B to the headphone and charg-
ing clamp.
The coil is charged using the clamp supplied. Connect it along the ribs of the coil cover to ensure the
correct connecting direction and avoid a reverse polarity. The clamp output must be facing towards the
center of the coil as indicated below.
Output 5V
1 A or +
Lithium Polymer (LiPo) battery lifetime
A well-maintained LiPo battery can last ten years in your XP detector !
The Lithium Polymer batteries (LiPo) are designed to withstand hundreds of charges, thereby generating
on a weekly basis.
Battery lifetime is in your hands !
a long time. Keep them half charged between 40 and 80%.
and then charging them to 40-80%.
38