Manual; Tracking; Magnetic Soil - XP Metal Detectors DEUS II Manual

Hide thumbs Also See for DEUS II:
Table of Contents

Advertisement

Manual Mode
(prg DEUS MONO only)
Read the numeric value displayed by the mineralization index when you pump the coil on the ground for a
Manual mode is not available in multi-frequency programs, as it would be tedious to set each frequency
independently. The Grab mode advantageously allows to capture the ground value of each frequency
simultaneously.
Tracking Mode
Tracking is an automatic ground correction mode. It questions the ground continuously to determine its
average value. This mode can be useful if the ground mineralization is relatively uniform and changes
slowly. This mode is not suitable in ground where mineralization has been generated by old human set-
succession can be too varied, so that an average value will not be conclusive. Therefore use the GRAB
mode as a preference.
Magnetic ground
When searching magnetic ground such as black sand, deep targets may be masked
G.B. BEACH
90
because their values are similar the soil values. The Magnetic Ground setting allows
MAGNETIC
T.ID
G.ID
you to accept low tones generated by the ground, ferrite, meteorites as well as dis-
ACCEPT
tant targets that are usually masked.
GRAB

TRACKING

REJECT:
and the most stable.
ACCEPT:
a positive sound.
(prg DIVING / BEACH / BEACH SENS only)
Black sand, ferrite, meteorites and good deep targets are accepted with
-
and
+
to achieve the same values.
GROUND
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents