General; Problems And Solutions - XP Metal Detectors DEUS II Manual

PROBLEMS and SOLUTIONS

You become aware of abnormal performance, instability, false signals or interference, for no apparent reason
CAUSES
The machine is over sensitive.
You are in a high EMI zone with a great deal of
interference (high-voltage power lines, electric
transformer, electric fence).
There is a storm nearby and the electromagnetic
discharges of lightning appears to be interfering
with the detector.
You are close to other working metal detectors.
The ground is heavily infested with iron and oth-
er metals.
The coil does not switch on, unlike the remote control and the headphones
CAUSES
You have the wrong coil selected in the menu:
OPTION/PAIRING COIL.
The serial number of the coil that you have en-
tered in the remote control was incorrect or was
changed inadvertently.
The battery is discharged.
The coil is defective.
There is no detection sound in the headphones despite them being switched on
CAUSES
If you are using the WS6 Master (without remote
control) you may have chosen an incorrect coil
in OPTION > COIL.
The headphone has not been paired with the re-
mote control.
If you are using the WS6 Master (without remote
control), the headphones have not been paired
with the coil.
There is no sound in the headphones when passing over a target and
CAUSES
The backphones are not working.
The module maybe faulty.
42
(and pressing the buttons generates an audible beep)
pressing the buttons generates no audible beep
SOLUTIONS
Lower the sensitivity.
Lower the sensitivity, change or shift frequency.
Move to a different zone.
Switch off and wait for the storm to pass.
Never detect in a lightning storm.
Change or shift the frequency.
Find a less infested place - lower sensitivity
Do not practise in your garden !
SOLUTIONS
Select the correct coil.
Check the coil serial number entered or pair it again
automatically (see coil > pairing).
Recharge it. - check charging source.
Contact your reseller.
SOLUTIONS
Select the correct coil.
Pair them.
SOLUTIONS
The module has come away slightly from the head-
band. Clip it back in.
Or Change headband, it is easy to replace.
Contact your reseller.