Labconco RapidVap 73200 Series User Manual page 22

Chapter 4: Using Your RapidVap Vertex Evaporator
Run:
To re-run the last program while in the opening display, press "Run." The
heater will be powered, the master nitrogen control valve will open, the time
will start to count down and the display will show:
BLOCK
Pause
In this example, 52 indicates the sample block temperature, 51 indicates the
upper block temperature or sample temperature, and 124 indicates the time
remaining for this programmed run.
Press "Pause" to temporarily halt the run.
BLOCK
Re-Start
The word "Pause" will be replaced with "Re-Start" which when pressed will
continue the run from the point where it was paused.
Press "Stop" to halt the run entirely. The display will show the opening
screen.
18
SAMP
52 51
Stop
SAMP
57 55
Stop
Product Service 1-800-522-7658
TIME
124
Prog
TIME
67
Prog