KGUARD Standalone DVR KG-SHA116 User Manual
5.2.6.1. Intranet/LAN Access Setup
Preparation:
Access the configuration page of your router.
Reserve an IP Address in your router that is not used by other computers or devices
connected to your internal network.
Write down the assigned IP Address of your DVR, Subnet Mask, IP Address of the router
(Gateway) your DVR connect to for future reference.
If your DVR is connected to a router of your LAN (local area network), then you can
setup the NETWORK Setup section of the DVR to view the image your DVR is recording
remotely using computers connected within your LAN.
Left click
;Right click
40
www.kguardsecurity.com