Kodak HEALTH SCIENCES MINILOADER 2 Plus Stand-alone Installation Instructions Manual page 7

Hide thumbs Also See for HEALTH SCIENCES MINILOADER 2 Plus Stand-alone:

INSTALLATION INSTRUCTIONS

!! CAUTION TWO PEOPLE

Figure 4

11.

Secure the MINILOADER on it's STAND using the four socket head SCREWS and M8 STAR

WASHERS supplied with the STAND. IMPORTANT - ENSURE THERE IS NO PAINT ON THE

STAND WHERE THE STAR WASHERS CONNECT.

12.

Remove the left hand SIDE PANEL from the MINILOADER.

13.

Remove the following PACKING PROTECTIONS :-

a) The two RUBBER TIES that restrain the two SUCKER BARS.

b) The packing BLOCKS under the TWO SUCKER BARS.

c) The protection PACKING from the film exit CHUTE.

d) The TIE-WRAP from the MAGAZINE INJECTOR BAR.

e) The TIE from the CASSETTE INJECTOR.

14.

Remove the BAG containing the SERVICE KEYS and the ZERO POSITION PEG.

December 1992

ARE

REQUIRED TO LIFT THE MINILOADER !!

Only lift by the frame

Star washers (4)

Screws (4)

Page II-7

II 3239

Table of Contents