Shuttle XPC User Manual page 3

3
4
5
6
7
8
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy: N/A
EMI Interference:
Crystal : 14.318MHz(X1)/ 25MHz(X1)/ 32.768KHz(X1)/ 24.576MHz(X2).
Clock Generator: U4, U5
(D) Supported Host Peripherals:
Host Peripheral
# 1
# 2
# 3
# 4
# 5
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
200MHz
200MHz
133MHz
133MHz
133MHz
133MHz
Product Name
Case
Power Supply
Serial ATA Seagate
Card Reader
DVD Player
Intel Pentium D 930 3.0 GHz
Intel Pentium D 930 3.0 GHz
Intel Pentium4 2.8 GHz
Intel Pentium4 2.8 GHz
Intel Celeron D 356 3.3 GHz
Intel Celeron D 356 3.3 GHz
Close
Open
Close
Open
Close
Open
Model Name
SS30G2
PC30I2003
ST312G026A8
PC12
P10437007995