Shuttle XPC User Manual page 11

Power Management Setup
Use this menu to specify your power management settings.
PnP / PCI Configurations
This entry appears if your system supports PnP / PCI.
PC Health Status
This entry displays the current system temperature, Voltage, and FAN
settings.
Frequency Control
Use this menu to specify your settings for frequency control.
Load Fail-Safe Defaults
Use this menu to load the BIOS default values for the minimal/stable per-
formance of your system to operate.
Load Optimized Defaults
Use this menu to load the BIOS default values that are factory-set for opti-
mal system operation. While Award has designed the custom BIOS to
maximize performance, the factory has the right to change these defaults
to meet users' needs.
Set Supervisor / User Password
Use this menu to change, set, or disable password protection. This allows
you to limit access to the system and Setup, or only to Setup.
Save & Exit Setup
Save CMOS value changes in CMOS and exit from setup.
Exit Without Saving
Abandon all CMOS value changes and exit from setup.
5