Shuttle XPC User Manual page 27

Power Up by Alarm
When set to Enabled, the following three fields become available and
you can set the month, date (day of the month), hour, minute and second
to turn on your system.
Ø The choice: Enabled, Disabled.
Month Alarm
This is for specifying the alarm month which system will awaken
the system from suspend mode.
Ø The choice: NA, 1 ~ 12.
Day of Month Alarm
This item selects the alarm date.
Ø Key in a DEC number: Min=0, Max=31.
Time (hh : mm : ss) Alarm
This item selects the alarm Time.
Ø [hh] Key in a DEC number: Min=0, Max=23.
Ø [mm/ss] Key in a DEC number: Min=0, Max=59.
** Reload Global Timer Events **
Global Timer (power management) Events are I/O events whose occur-
rence can prevent the system from entering a power saving mode or can
awaken the system from such as a mode. In effect, the system remains
alert for anything that occurs to a device that is configured as Enabled,
even when the system is in a power-down mode.
Primary IDE
When these items are enabled, the system will restart the power-saving
timeout counters when any activity is detected on any of the drives or
devices on the primary IDE channels.
Ø The choice: Disabled or Enabled.
FDD,COM,LPT Port
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the floppy disk drive,
the serial ports, or the parallel port.
Ø The choice: Disabled or Enabled.
PCI PIRQ[A-D]#
When this item is disabled, any PCI device set as the Master will not
power on the system.
Ø The choice: Disabled or Enabled.
21