Shuttle XPC User Manual page 23

Onboard Serial Port1
Select an address and corresponding interrupt for the first and second
serial ports.
Ø The choice: 3E8/IRQ4, 2E8/IRQ3, 3F8/IRQ4, 2F8/IRQ3,Auto, or
Disabled.
Onboard Parallel Port
This item allows you to determine onbaord parallet port controller I/O
address setting.
Ø The Choice: 378/IRQ7, 278/IRQ5, 3BC/IRQ7 or Disabled.
Parallel Port Mode
Select an operating mode for the onboard parallel(printer) port. Select
Normal,Compatible, or SPP unless you are certain your hardware and
software both support one of the other avaukable modes.
Ø The Choice: SPP, EPP, ECP or ECP + EPP.
ECP Mod Use DMA
Select a DMA channel for the parallel port for use during ECP mode.
Ø The Choice: 1 or 3.
17