Shuttle XPC User Manual page 2

Shuttle XPC have been via the EMI test in terms of series of regulations: EN55022/CISPR22/
AS/NZS3548 Class B, EN55024 (1998/AS/NZS), EN4252.1 (1994), EN61000, ANSI C63.4 (1992),
CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illustrated as follows:
(A) Voltage: AC 110V/60HZ & AC 230V/50HZ
(B) Tested Product Information:
Product Name: XPC
Status: Sample
Model Name: SS30G2
S/N: N/A
CPU:
External Frequency: 133 MHz
Intel Pentium 4, LGA 775 Processor: 2.80 GHz
Intel Celeron D 356, LGA 775 Processor: 3.3 GHz
External Frequency: 200 MHz
Intel Pentium 4, LGA 775 Processor: 3.4 GHz
Intel Celeron D 930, LGA 775 Processor: 3.0 GHz
Serial Port: one port with 9 pins
VGA Port: one port with 15 pins
Keyboard Port: one port with 6 pins
Mouse Port: one port with 6 pins
USB 2.0 Port: six ports with 4 pins respectively
1394 Port: one port with 4 pins and one port with 6 pins respectively
LAN Port: one port with 8 pins (10Mbps/100Mbps)
Center/Bass-Out Port: four ports
Mic-In Ports: one port
Line-In Ports: two ports
SPDIF-Out (Coaxial) Port: one port
SPDIF-Out (Optical) Port: one port
SPDIF-In (Optical) Port: one port
Clear CMOS button: one port
DIMM Memory (optional): DDRII 533/667 1GBx2
Power Cable: Detachable and Shielded (with a GND pin)
Monitor: CRT
Maximum Resolution: 2048 x 1536 V:75Hz
All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
Test Mode External Frequency
1
2
Shuttle XPC EMI Test Statement
200MHz
200MHz
CPU
Intel Pentium4 3.4 GHz
Intel Pentium4 3.4 GHz
CPU Open/Close
Close
Open