Shuttle XPC User Manual page 17

Hide thumbs Also See for XPC:
Table of Contents

Advertisement

CPU L3 Cache
This item allows you to enable or disable the CPU L3 Cache.
Ø The choice: Enabled or Disabled.
Note : CPU support, L3 item appear.
Hyper-Threading Technology
The latest Intel application defines a high-speed calculating ability to op
timize your system by two CUPs supported(one virtual, one physical) in a
multi-task environment.
Ø The choice: Enabled, or Disabled.
CPU L2 Cache ECC Checking
This item allows you to enable or disable the CPU L2 Cache ECC
Checking.
Ø The choice: Enabled, or Disabled.
Quick Power On Self Test
This item speeds up Power-On Self Test (POST) after you power on the
computer. If it is set to enabled, BIOS will shorten or skip some check
items during POST.
Ø The choice: Enabled, or Disabled.
First/Second/Third Boot Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items.
Ø The Choice: LS120, Hard Disk, CDROM, ZIP100, USB-FDD,
USB-ZIP,USB-CDROM, LAN, Disabled or Floppy.
Boot Other Device
If BIOS can't load O.S. from First/Second/Third boot device you select
above, BIOS will search other devices and attempt to load O.S..
Ø The choice: Enabled or Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot-Up. Disabling speed boots up.
Ø The choice: Enabled or Disabled.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ss30g2

Table of Contents