Table of Contents
Advertisement
Cleaning and Greasing the End Caps
1. Clean both end caps and the accessible parts of the hub with a dry cloth.
2. Grease both bearings and the contact surface of
the end caps.
Required material, see table on page 14.
Putting on the End Caps
1. Put both end caps onto the hub by hand.
Note: The short end cap must be placed on the drive
side.
Closing Steps
Rear wheel: Mount the cassette if necessary.
Mount the brake disc.
CLASSIC Wheels - Technical Manual
Link
see instructions of
the manufacturer
15
Advertisement
Table of Contents
