Table of Contents
Advertisement
3. Clamp the axle with the special strap into the vise.
Required material, see table on page 9.
4. Unscrew the end cap and remove it.
20 mm, 15 mm und 9 mm end caps:
22 mm open-end wrench
QR end caps: 5 mm Allen key
5. Remove the bearing from the axle.
Assembling Bearings and Axle
1. Slightly grease the seating of the bearings and the
inner surface of the hub shell using multipurpose
grease.
CLASSIC Wheels - Technical Manual
11
Advertisement
Table of Contents
