ELCOM POS-4000 User Manual page 32

© Elcom, s. r. o.
Figure 3.7
PLU record programming
dialogue. After pressing the
New or Edit buttons the
inactive elements are acti-
vated and the bottom but-
ton bar changes as shown
in the underlying picture.
32
Action description
press the PLU items
button
Flag descriptions:
• Name
• PLU
• Price
• Stock
• Department
• Tax
• Sale
• Units
• Descriptive
• No fraction
• Neg. stock
• Single
• Package
• Customer discount
• Halo
>
POS–4000
POS POS keyboard
PLU items icon is se-
lected, then press
– Article name. This description will be printed onto
the receipt.
– PLU code. The EAN bar-code will appear here. Bar-
codes can be entered manually or using the bar-code
scanner.
– Article price. It is entered in the master currency, set
in the Currency group. Up to ten-digit number or up
to specified Halo (see below).
– Current stock.
– Assign the department to the article using the pull-
down menu. Departments are programmed in the
Departments group.
– Assign the tax level to the article using the pull-down
menu. Selected tax will be charged to the article. Tax
levels are programmed in the Taxes group.
– Can prohibit sale or specify the manner of entering
the price during sale (entry via keyboard (open),
preprogrammed price only (preset) or both).
– Assign the sale unit to the article using the pull-down
menu. The sale units are programmed in the Units
group.
– PLU without price, it is only a descriptive name.
– Forbids selling a fraction from this article if checked.
– Allows negative stock values if checked.
– This PLU will automatically finish the sale.
– This PLU is designated as returnable packaging for
reports.
– Value discount per piece can be applied to this PLU.
– The maximum number of digits while entering the
price using the keyboard. This number concerns only
the digits to the left of the decimal separator. This
POS programming
PC keyboard
until the
the PLU items icon is
selected, then press
until