Print Group - ELCOM POS-4000 User Manual

POS programming
• Total
• RA
• PO
After the programming is finished, check thoroughly the correctness of entered values. Ac-
cidental errors can still be corrected. The group dialogue is exited by pressing the OK (OK
Enter).

Print group

This group contains the settings for the printer and printing.
Action description POS
log in (you have to be
authorised to enter pro-
gramming mode)
press the Programming
button
press the Printing
and voice synthesis
button
Flag descriptions:
• Log on
• Printing
Print receipt in training
Print duplicate
Print text logo on journal
Free lines between receipt
Printing after the break
POS–4000
– Sets the function text for total sale value.
– Sets the function text for receive on account
operation.
– Sets the function text for paid out operation.
POS keyboard
until the
Programming icon is
selected, then press
until the
Printing icon is se-
lected, then press
– Logging on is compulsory after turning on or
unlocking if checked.
– This group sets the printing parameters.
– Prints receipts in training mode if checked.
– Allows duplicate printing if checked.
– Prints text logo onto journal tape if checked.
– Use the pull-down menu to specify number of empty
lines before the cutter cuts the receipt roll.
– Determines restoration of printing (for instance if
the unit is turned off accidentally). Printing can be
restored with or without printed message.
PC keyboard
until the
Programming icon is
sel e cted, then press
until
the Printing icon is
sel e cted, then press
© Elcom, s. r. o.
< Figure 3.5
Printing and voice synthe-
sis group dialogue
29